ADM485AQ vs ADM485ARZ Ikinahambing
Detalyadong pagkakahiwalay na pagkakahambing ng ADM485AQ sa pamamagitan ng Analog Devices at ADM485ARZ sa pamamagitan ng Analog Devices. Ikinahambing ang mga pangunahing paglalarawan, mga tama ng elektriko, paakay, kalagayan ng buhay, presyo, at pagkakaroon upang makita ang pinakamahusay na komponente para sa iyong mga kinakailangang pang disenyo.
Analog Devices
ADM485AQ - 5 V Low-Power RS-485/422 Transceiver | Analog Devices
ADM485AQ ✓ NakahandaAnalog Devices
ADM485ARZ - 5V 5Mbps Half-Duplex RS-485/RS-422 Transceiver | Analog Devices (Tape & Reel)
ADM485ARZ ✓ NakahandaPagsanggunian na paghahambing
| Parametro | ADM485AQ | ADM485ARZ |
|---|---|---|
| Brand | Analog Devices | Analog Devices |
| Kategorya | Interface ICs | Interface ICs |
| Katayuan ng Lifecycle | Aktibo | Aktibo |
| Product Type | Differential RS-485/RS-422 line transceiver | — |
| Volte ng Pagbibigay | 5 V | 5 V (single supply) |
| Maximum Data Rate | 5 Mbit/s | — |
| Driver and Receiver Count | 1 differential driver and 1 differential receiver | — |
| Communication Standards | EIA RS-485 and RS-422 | — |
| Topolohiya | Bidirectional multipoint bus transmission lines | — |
| Hanay ng Temperature na Operasyon | Commercial and industrial temperature range | -40 C to +85 C |
| Packhaging | 8-pin ceramic DIP | SOIC-8 (SO-8) / SO-8 |
| Package Designation | AQ | — |
| Switching Speed | Extremely fast switching speed | — |
| Driver Propagation Delay | Minimal | — |
| Differential Signaling | Balanced data transmission | — |
| EMI Behavior | Low skew is designed to minimize EMI interference | — |
| Style ng Pagpapasok | Through-hole | — |
| Tindminan RoHS | [DATA_NEEDED: RoHS status] | Compliant |
| REACH Status | [DATA_NEEDED: REACH status] | Unaffected |
| Automotive Qualification | [DATA_NEEDED: AEC-Q100 status] | — |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | — |
| Absolute Maximum Ratings | [DATA_NEEDED: absolute maximum ratings] | — |
| Operating Voltage Range | [DATA_NEEDED: operating voltage range] | — |
| Kuru-kuryente ng Pagbibigay | [DATA_NEEDED: supply current] | — |
| Differential Output Voltage | [DATA_NEEDED: differential output voltage] | — |
| Receiver Input Sensitivity | [DATA_NEEDED: receiver input sensitivity] | — |
| Common-Mode Rejection | [DATA_NEEDED: common-mode rejection] | — |
| Power Dissipation | [DATA_NEEDED: power dissipation] | — |
| Type | — | Transceiver |
| Protocol | — | RS-422, RS-485 |
| Number of Drivers/Receivers | — | 1/1 |
| Duplex | — | Half |
| Rate ng Data | — | 5 Mbps (max) |
| Receiver Hysteresis | — | [DATA_NEEDED: receiver hysteresis] |
| Common-Mode Range | — | -7 V to +12 V |
| Driver Differential Output | — | [DATA_NEEDED: VOD min/max] |
| Uri ng Pagpapasok | — | Surface Mount |
| ESD Protection | — | [DATA_NEEDED: ESD HBM rating] |
| Level ng MSL | — | 1 (Unlimited) |
| Compliance | — | ROHS3 Compliant |
| Enable Pins | — | Yes (DE driver enable, RE receiver enable, active-low/GPIO logic) |