ATSAMA5D2C-XULT vs ATSAME54-XPRO तुलना
विस्तृत दोनों ओर की तुलना ATSAMA5D2C-XULT द्वारा Microchip Technology और ATSAME54-XPRO द्वारा Microchip Technology. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
Microchip Technology
ATSAMA5D2C-XULT - SAMA5D2 Xplained Ultra ARM Cortex-A5 MPU Evaluation Kit | Microchip
ATSAMA5D2C-XULT ObsoleteMicrochip Technology
ATSAME54-XPRO - SAM E54 120MHz Cortex-M4F Evaluation Board | Microchip
ATSAME54-XPRO ✓ सक्रियविशेषता तुलना
| पैरामीटर | ATSAMA5D2C-XULT | ATSAME54-XPRO |
|---|---|---|
| ब्रांड | Microchip Technology | Microchip Technology |
| श्रेणी | Development Boards | Development Boards |
| लाइफसाइकिल स्थिति | Obsolete | सक्रिय |
| Product Type | Embedded MPU Evaluation Board | Evaluation Kit / Development Board |
| Series | AT91SAMA5 / SAMA5D2 Xplained Ultra | — |
| Core Processor | ARM Cortex-A5 (SAMA5D2) | ARM Cortex-M4F (with FPU and DSP extensions) |
| Core Architecture | 32-bit MPU | 32-bit RISC |
| Maximum CPU Frequency | 500 MHz | — |
| On-board DRAM | 128 MB DDR2 SDRAM (1 Gbit) | — |
| On-board Flash | 32 MB QSPI NOR Flash (256 Mbit) | — |
| Ethernet | 10/100 Mbit with on-board PHY | — |
| USB | 2x USB 2.0 High-Speed (Host/Device) | — |
| Card Slot | 1x microSD | — |
| Display Interface | Parallel LCD connector (up to 4.3") | — |
| Audio | Line In / Line Out (on-board codec) | — |
| CAN | 2x CAN-FD | — |
| On-board Debugger | Embedded J-Link OB | — |
| Expansion Headers | Arduino, RPi, MikroElektronika Click | — |
| Input Voltage | 5 V (USB DEBUG or external supply) | — |
| Packaging | Bulk (Box) | — |
| Product Status | Obsolete (per Octopart listing) | — |
| RoHS स्थिति | Compliant | Compliant |
| Target MCU | — | ATSAME54P20A |
| Maximum Clock Speed | — | 120 MHz |
| Flash Memory | — | 1 MB dual-panel Flash with ECC (on target MCU) |
| SRAM | — | 256 KB with ECC (on target MCU) |
| Embedded Debugger | — | Atmel EDBG (onboard, no external probe required) |
| Debug Interfaces | — | 10-pin Cortex Debug (SWD), 20-pin Cortex Debug + ETM (4-bit trace) |
| Main Crystal | — | 12 MHz |
| Backup Crystal | — | 32.768 kHz (RTC reference) |
| Backup Power | — | Supercapacitor for RTC retention |
| CAN Transceiver | — | ATA6561 (CAN-FD capable) |
| Extension Headers | — | 2x Xplained Pro extension headers, mikroBUS socket |
| Capture Interface | — | Parallel Capture Controller (ArduCAM compatible) header |
| USB Interfaces | — | USB-C debug (EDBG), USB-C micro-B device |
| Operating System Support | — | Azure RTOS, Zephyr RTOS, FreeRTOS, TinyGo, MPLAB X, Atmel Studio 7 |