ATSAMA5D2C-XULT vs ATSAME54-XPRO 比較
詳細並排比較 ATSAMA5D2C-XULT 由 Microchip Technology 與 ATSAME54-XPRO 由 Microchip Technology. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況，以找出最符合您設計需求的元件。
Microchip Technology
ATSAMA5D2C-XULT - SAMA5D2 Xplained Ultra ARM Cortex-A5 MPU Evaluation Kit | Microchip
ATSAMA5D2C-XULT ObsoleteMicrochip Technology
ATSAME54-XPRO - SAM E54 120MHz Cortex-M4F Evaluation Board | Microchip
ATSAME54-XPRO ✓ 啟用中規格比較
| 參數 | ATSAMA5D2C-XULT | ATSAME54-XPRO |
|---|---|---|
| 品牌 | Microchip Technology | Microchip Technology |
| 類別 | Development Boards | Development Boards |
| 生命週期狀態 | Obsolete | 啟用中 |
| Product Type | Embedded MPU Evaluation Board | Evaluation Kit / Development Board |
| Series | AT91SAMA5 / SAMA5D2 Xplained Ultra | — |
| Core Processor | ARM Cortex-A5 (SAMA5D2) | ARM Cortex-M4F (with FPU and DSP extensions) |
| Core Architecture | 32-bit MPU | 32-bit RISC |
| Maximum CPU Frequency | 500 MHz | — |
| On-board DRAM | 128 MB DDR2 SDRAM (1 Gbit) | — |
| On-board Flash | 32 MB QSPI NOR Flash (256 Mbit) | — |
| Ethernet | 10/100 Mbit with on-board PHY | — |
| USB | 2x USB 2.0 High-Speed (Host/Device) | — |
| Card Slot | 1x microSD | — |
| Display Interface | Parallel LCD connector (up to 4.3") | — |
| Audio | Line In / Line Out (on-board codec) | — |
| CAN | 2x CAN-FD | — |
| On-board Debugger | Embedded J-Link OB | — |
| Expansion Headers | Arduino, RPi, MikroElektronika Click | — |
| Input Voltage | 5 V (USB DEBUG or external supply) | — |
| Packaging | Bulk (Box) | — |
| Product Status | Obsolete (per Octopart listing) | — |
| RoHS 狀態 | Compliant | Compliant |
| Target MCU | — | ATSAME54P20A |
| Maximum Clock Speed | — | 120 MHz |
| Flash Memory | — | 1 MB dual-panel Flash with ECC (on target MCU) |
| SRAM | — | 256 KB with ECC (on target MCU) |
| Embedded Debugger | — | Atmel EDBG (onboard, no external probe required) |
| Debug Interfaces | — | 10-pin Cortex Debug (SWD), 20-pin Cortex Debug + ETM (4-bit trace) |
| Main Crystal | — | 12 MHz |
| Backup Crystal | — | 32.768 kHz (RTC reference) |
| Backup Power | — | Supercapacitor for RTC retention |
| CAN Transceiver | — | ATA6561 (CAN-FD capable) |
| Extension Headers | — | 2x Xplained Pro extension headers, mikroBUS socket |
| Capture Interface | — | Parallel Capture Controller (ArduCAM compatible) header |
| USB Interfaces | — | USB-C debug (EDBG), USB-C micro-B device |
| Operating System Support | — | Azure RTOS, Zephyr RTOS, FreeRTOS, TinyGo, MPLAB X, Atmel Studio 7 |