ATSAMA5D2C-XULT vs ATSAME54-XPRO موازنہ
تفصیلی ساتھ ساتھ موازنہ از ATSAMA5D2C-XULT بذریعہ Microchip Technology اور ATSAME54-XPRO بذریعہ Microchip Technology. اہم خصوصیات، برقی پیرامیٹرز، پیکیجنگ، لائف سائیکل اسٹیٹس، قیمتوں اور دستیابی کا موازنہ کریں تاکہ آپ کی ڈیزائن ضروریات کے لیے بہترین کمپوننٹ کا تعین ہو سکے۔
Microchip Technology
ATSAMA5D2C-XULT - SAMA5D2 Xplained Ultra ARM Cortex-A5 MPU Evaluation Kit | Microchip
ATSAMA5D2C-XULT ObsoleteMicrochip Technology
ATSAME54-XPRO - SAM E54 120MHz Cortex-M4F Evaluation Board | Microchip
ATSAME54-XPRO ✓ فعالخصوصیات کا موازنہ
| پیرامیٹر | ATSAMA5D2C-XULT | ATSAME54-XPRO |
|---|---|---|
| برانڈ | Microchip Technology | Microchip Technology |
| زمرہ | Development Boards | Development Boards |
| لائف سائیکل کی حالت | Obsolete | فعال |
| Product Type | Embedded MPU Evaluation Board | Evaluation Kit / Development Board |
| Series | AT91SAMA5 / SAMA5D2 Xplained Ultra | — |
| Core Processor | ARM Cortex-A5 (SAMA5D2) | ARM Cortex-M4F (with FPU and DSP extensions) |
| Core Architecture | 32-bit MPU | 32-bit RISC |
| Maximum CPU Frequency | 500 MHz | — |
| On-board DRAM | 128 MB DDR2 SDRAM (1 Gbit) | — |
| On-board Flash | 32 MB QSPI NOR Flash (256 Mbit) | — |
| Ethernet | 10/100 Mbit with on-board PHY | — |
| USB | 2x USB 2.0 High-Speed (Host/Device) | — |
| Card Slot | 1x microSD | — |
| Display Interface | Parallel LCD connector (up to 4.3") | — |
| Audio | Line In / Line Out (on-board codec) | — |
| CAN | 2x CAN-FD | — |
| On-board Debugger | Embedded J-Link OB | — |
| Expansion Headers | Arduino, RPi, MikroElektronika Click | — |
| Input Voltage | 5 V (USB DEBUG or external supply) | — |
| Packaging | Bulk (Box) | — |
| Product Status | Obsolete (per Octopart listing) | — |
| RoHS اسٹیٹس | Compliant | Compliant |
| Target MCU | — | ATSAME54P20A |
| Maximum Clock Speed | — | 120 MHz |
| Flash Memory | — | 1 MB dual-panel Flash with ECC (on target MCU) |
| SRAM | — | 256 KB with ECC (on target MCU) |
| Embedded Debugger | — | Atmel EDBG (onboard, no external probe required) |
| Debug Interfaces | — | 10-pin Cortex Debug (SWD), 20-pin Cortex Debug + ETM (4-bit trace) |
| Main Crystal | — | 12 MHz |
| Backup Crystal | — | 32.768 kHz (RTC reference) |
| Backup Power | — | Supercapacitor for RTC retention |
| CAN Transceiver | — | ATA6561 (CAN-FD capable) |
| Extension Headers | — | 2x Xplained Pro extension headers, mikroBUS socket |
| Capture Interface | — | Parallel Capture Controller (ArduCAM compatible) header |
| USB Interfaces | — | USB-C debug (EDBG), USB-C micro-B device |
| Operating System Support | — | Azure RTOS, Zephyr RTOS, FreeRTOS, TinyGo, MPLAB X, Atmel Studio 7 |