BSP742RXUMA1 vs BTS3046SDRATMA1 तुलना

विस्तृत दोनों ओर की तुलना BSP742RXUMA1 द्वारा Infineon और BTS3046SDRATMA1 द्वारा Infineon. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。

Infineon
BSP742RXUMA1 BSP742RXUMA1 - 400mA Smart High-Side Switch, 5-34V | Infineon

BSP742RXUMA1 - 400mA Smart High-Side Switch, 5-34V | Infineon

BSP742RXUMA1 ✓ सक्रिय
Infineon
BTS3046SDRATMA1 BTS3046SDRATMA1 - 3.6A Smart Low-Side Switch HITFET | Infineon

BTS3046SDRATMA1 - 3.6A Smart Low-Side Switch HITFET | Infineon

BTS3046SDRATMA1 ✓ सक्रिय

विशेषता तुलना

पैरामीटर BSP742RXUMA1 BTS3046SDRATMA1
ब्रांड Infineon Infineon
श्रेणी Power MOSFET Drivers Power MOSFET Drivers
लाइफसाइकिल स्थिति सक्रिय सक्रिय
Product Type Smart High-Side Power Switch Smart Low-Side Power Switch (HITFET family)
टोपोलॉजी 1:1 N-Channel High-Side Switch —
Operating Voltage Range (Vbb) 5 V to 34 V 4.5 V to 42 V
Continuous Load Current 400 mA —
On-Resistance R_DS(on) (typ) 70 mΩ —
On-Resistance R_DS(on) (max) [DATA_NEEDED: R_DS(on) max value at 25C] —
Quiescent Current (Iq typ) 5 µA —
Input Type CMOS-compatible logic, active-high —
ऑपरेटिंग तापमान रेंज -40°C to +150°C (TJ) -40 C to +150 C
पैकेज PG-DSO-8-6 (8-pin SOIC, exposed pad variant) PG-TO252-3-11 (DPAK, 3-pin with tab)
माउंटिंग प्रकार Surface Mount Surface Mount
AEC-Q100 Qualification Qualified (Automotive Grade) —
Protection Features Overload, Short-Circuit, Thermal Shutdown with Restart, Overvoltage (Load Dump), Reverse Battery Over-temperature, short-circuit, over-current, over-voltage (clamp), ESD
Diagnostic Output Yes (Status / Fault feedback) —
Inductive Load Switching Fast demagnetization integrated —
RoHS Compliance Compliant —
MSL Moisture Sensitivity Level MSL 2 (per JEDEC J-STD-020) —
Manufacturer — Infineon Technologies
Switch Configuration — 1:1 N-Channel, single channel
Continuous Output Current — 3.6 A
On-State Resistance (Rds(on)) — 95 mOhm (0.095 ohm) typical
Load Type — Low-side switch (ground-referenced load)
Input Logic — CMOS-compatible with internal pull-down
Status Feedback — Yes (status output pin)
Automotive Qualification — AEC-Q100 (where variant specified)
RoHS / Lead-Free — Compliant / Yes

डेटाशीट और संसाधन

सभी उत्पादों को देखें BOM बनाएं कीट की अनुरोध