BSP742RXUMA1 vs BTS3046SDRATMA1 So sánh

So sánh chi tiết song song của BSP742RXUMA1 bằng Infineon và BTS3046SDRATMA1 bằng Infineon. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.

Infineon
BSP742RXUMA1 BSP742RXUMA1 - 400mA Smart High-Side Switch, 5-34V | Infineon

BSP742RXUMA1 - 400mA Smart High-Side Switch, 5-34V | Infineon

BSP742RXUMA1 ✓ Hoạt động
Infineon
BTS3046SDRATMA1 BTS3046SDRATMA1 - 3.6A Smart Low-Side Switch HITFET | Infineon

BTS3046SDRATMA1 - 3.6A Smart Low-Side Switch HITFET | Infineon

BTS3046SDRATMA1 ✓ Hoạt động

So sánh thông số kỹ thuật

Tham số BSP742RXUMA1 BTS3046SDRATMA1
Thương hiệu Infineon Infineon
Danh mục Power MOSFET Drivers Power MOSFET Drivers
Trạng thái vòng đời Hoạt động Hoạt động
Product Type Smart High-Side Power Switch Smart Low-Side Power Switch (HITFET family)
Cấu trúc 1:1 N-Channel High-Side Switch —
Operating Voltage Range (Vbb) 5 V to 34 V 4.5 V to 42 V
Continuous Load Current 400 mA —
On-Resistance R_DS(on) (typ) 70 mΩ —
On-Resistance R_DS(on) (max) [DATA_NEEDED: R_DS(on) max value at 25C] —
Quiescent Current (Iq typ) 5 µA —
Input Type CMOS-compatible logic, active-high —
Khoảng nhiệt độ hoạt động -40°C to +150°C (TJ) -40 C to +150 C
Hộp PG-DSO-8-6 (8-pin SOIC, exposed pad variant) PG-TO252-3-11 (DPAK, 3-pin with tab)
Kiểu lắp đặt Surface Mount Surface Mount
AEC-Q100 Qualification Qualified (Automotive Grade) —
Protection Features Overload, Short-Circuit, Thermal Shutdown with Restart, Overvoltage (Load Dump), Reverse Battery Over-temperature, short-circuit, over-current, over-voltage (clamp), ESD
Diagnostic Output Yes (Status / Fault feedback) —
Inductive Load Switching Fast demagnetization integrated —
RoHS Compliance Compliant —
MSL Moisture Sensitivity Level MSL 2 (per JEDEC J-STD-020) —
Manufacturer — Infineon Technologies
Switch Configuration — 1:1 N-Channel, single channel
Continuous Output Current — 3.6 A
On-State Resistance (Rds(on)) — 95 mOhm (0.095 ohm) typical
Load Type — Low-side switch (ground-referenced load)
Input Logic — CMOS-compatible with internal pull-down
Status Feedback — Yes (status output pin)
Automotive Qualification — AEC-Q100 (where variant specified)
RoHS / Lead-Free — Compliant / Yes

Hồ sơ kỹ thuật & Tài nguyên

Xem tất cả sản phẩm Tạo BOM Yêu cầu báo giá