BSP752RXUMA2 vs ITS4140NHUMA1 तुलना

विस्तृत दोनों ओर की तुलना BSP752RXUMA2 द्वारा Infineon और ITS4140NHUMA1 द्वारा Infineon. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。

Infineon
BSP752RXUMA2 BSP752RXUMA2 - 1.3A Smart High-Side Power Switch | Infineon

BSP752RXUMA2 - 1.3A Smart High-Side Power Switch | Infineon

BSP752RXUMA2 ✓ सक्रिय
Infineon
ITS4140NHUMA1 ITS4140NHUMA1 - 200mA High-Side Smart Switch | Infineon

ITS4140NHUMA1 - 200mA High-Side Smart Switch | Infineon

ITS4140NHUMA1 ✓ सक्रिय

विशेषता तुलना

पैरामीटर BSP752RXUMA2 ITS4140NHUMA1
ब्रांड Infineon Infineon
श्रेणी Power MOSFET Drivers Power MOSFET Drivers
लाइफसाइकिल स्थिति सक्रिय सक्रिय
Product Type Smart High-Side Power Switch —
टोपोलॉजी High-side, 1:1 N-channel 1:1 (Input to Output)
Continuous Load Current 1.3 A —
On-State Resistance (RON) [DATA_NEEDED: typical RON value in ohms at 25C] —
Supply Voltage Range (Vbb) [DATA_NEEDED: Vbb min/max operating range] 4.9 V to 60 V
Load Dump Protection Yes (integrated) —
Overload Protection Yes (current limitation) Yes
Short Circuit Protection Yes —
थर्मल शटडाउन Yes (with auto-restart) —
Reverse Battery Protection Yes —
Open-Load Detection (OFF state) Yes (via external resistor) —
Status Feedback Pin Yes —
Fast Demagnetization Yes (for inductive loads) —
ऑपरेटिंग तापमान रेंज -40C to +150C (junction) -40 C to +125 C
पैकेज PG-DSO-8-6 (DSO-8-6) PG-SOT223-4 (3+Tab)
माउंटिंग प्रकार Surface Mount Surface Mount
Qualification AEC-Q100 (automotive grade) —
RoHS स्थिति Compliant Compliant
फ़ंक्शन — High-Side Power Switch / Load Driver
Switch Type — N-Channel (vertical, integrated)
Output Current (Continuous) — 200 mA
Load Dump Withstand — [DATA_NEEDED: load-dump transient rating per ISO 7637]
On-Resistance (RDS(on)) — [DATA_NEEDED: typical RDS(on) in ohms]
Short-Circuit Protection — Yes (current limit + thermal shutdown)
Overvoltage Protection — Yes (including load dump)
Inductive Load Clamping — Yes (active negative-voltage clamp at output)
Diagnostic Output — Yes (status/IN pin feedback)
MSL स्तर — 1 (per JEDEC J-STD-020)
Automotive Qualified — [DATA_NEEDED: AEC-Q100 grade]

डेटाशीट और संसाधन

सभी उत्पादों को देखें BOM बनाएं कीट की अनुरोध