BSP752RXUMA2 vs ITS4140NHUMA1 So sánh

So sánh chi tiết song song của BSP752RXUMA2 bằng Infineon và ITS4140NHUMA1 bằng Infineon. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.

Infineon
BSP752RXUMA2 BSP752RXUMA2 - 1.3A Smart High-Side Power Switch | Infineon

BSP752RXUMA2 - 1.3A Smart High-Side Power Switch | Infineon

BSP752RXUMA2 ✓ Hoạt động
Infineon
ITS4140NHUMA1 ITS4140NHUMA1 - 200mA High-Side Smart Switch | Infineon

ITS4140NHUMA1 - 200mA High-Side Smart Switch | Infineon

ITS4140NHUMA1 ✓ Hoạt động

So sánh thông số kỹ thuật

Tham số BSP752RXUMA2 ITS4140NHUMA1
Thương hiệu Infineon Infineon
Danh mục Power MOSFET Drivers Power MOSFET Drivers
Trạng thái vòng đời Hoạt động Hoạt động
Product Type Smart High-Side Power Switch —
Cấu trúc High-side, 1:1 N-channel 1:1 (Input to Output)
Continuous Load Current 1.3 A —
On-State Resistance (RON) [DATA_NEEDED: typical RON value in ohms at 25C] —
Supply Voltage Range (Vbb) [DATA_NEEDED: Vbb min/max operating range] 4.9 V to 60 V
Load Dump Protection Yes (integrated) —
Overload Protection Yes (current limitation) Yes
Short Circuit Protection Yes —
Tắt nhiệt Yes (with auto-restart) —
Reverse Battery Protection Yes —
Open-Load Detection (OFF state) Yes (via external resistor) —
Status Feedback Pin Yes —
Fast Demagnetization Yes (for inductive loads) —
Khoảng nhiệt độ hoạt động -40C to +150C (junction) -40 C to +125 C
Hộp PG-DSO-8-6 (DSO-8-6) PG-SOT223-4 (3+Tab)
Kiểu lắp đặt Surface Mount Surface Mount
Qualification AEC-Q100 (automotive grade) —
Trạng thái RoHS Compliant Compliant
Chức năng — High-Side Power Switch / Load Driver
Switch Type — N-Channel (vertical, integrated)
Output Current (Continuous) — 200 mA
Load Dump Withstand — [DATA_NEEDED: load-dump transient rating per ISO 7637]
On-Resistance (RDS(on)) — [DATA_NEEDED: typical RDS(on) in ohms]
Short-Circuit Protection — Yes (current limit + thermal shutdown)
Overvoltage Protection — Yes (including load dump)
Inductive Load Clamping — Yes (active negative-voltage clamp at output)
Diagnostic Output — Yes (status/IN pin feedback)
Cấp MSL — 1 (per JEDEC J-STD-020)
Automotive Qualified — [DATA_NEEDED: AEC-Q100 grade]

Hồ sơ kỹ thuật & Tài nguyên

Xem tất cả sản phẩm Tạo BOM Yêu cầu báo giá