BTS134DATMA1 vs BTS428L2ATMA1 तुलना

विस्तृत दोनों ओर की तुलना BTS134DATMA1 द्वारा Infineon और BTS428L2ATMA1 द्वारा Infineon. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。

Infineon
BTS134DATMA1 BTS134DATMA1 - 42V 3.5A Smart Low-Side Power Switch | Infineon

BTS134DATMA1 - 42V 3.5A Smart Low-Side Power Switch | Infineon

BTS134DATMA1 ✓ सक्रिय
Infineon
BTS428L2ATMA1 BTS428L2ATMA1 - 5.8A Smart High-Side Switch | Infineon

BTS428L2ATMA1 - 5.8A Smart High-Side Switch | Infineon

BTS428L2ATMA1 ✓ सक्रिय

विशेषता तुलना

पैरामीटर BTS134DATMA1 BTS428L2ATMA1
ब्रांड Infineon Infineon
श्रेणी Power MOSFET Drivers Power MOSFET Drivers
लाइफसाइकिल स्थिति सक्रिय सक्रिय
Manufacturer Infineon Technologies —
Product Series HITFET (BTS134) —
Switch Type N-Channel Low-Side Smart Power Switch —
Technology Smart SIPMOS (vertical DMOS + protection IC) Smart SIPMOS (vertical N-channel MOSFET with charge pump)
Input Type Logic Level CMOS-compatible, ground-referenced
Number of Channels 1 1
आउटपुट कॉन्फ़िगरेशन Low-Side —
Continuous Drain Current (ID) 3.5 A —
Operating Voltage (VLoad) 42 V (max) —
Drain-Source Voltage (VDS) 42 V —
On-State Resistance (RDS(on)) [DATA_NEEDED: RDS(on) at VGS=5V, TJ=25C] —
Input Logic Threshold (VIH/VIL) Logic-level (3.3 V / 5 V compatible GPIO) —
ESD Protection (Input Pin) Yes (embedded) —
थर्मल शटडाउन Yes (auto-restart) —
Current Limitation Yes —
Overload Protection Yes —
Short-Circuit Protection Yes —
Overvoltage Protection (Load Dump) Yes —
पैकेज PG-TO252-3-11 (DPAK, 2 leads + tab, SC-63) PG-TO252-5-11 (DPAK-5, 4 leads + tab)
माउंटिंग प्रकार Surface Mount Surface Mount
ऑपरेटिंग तापमान रेंज [DATA_NEEDED: TJ min/max -40C to +150C is typical for HITFET] [DATA_NEEDED: min/max]
Automotive Qualification AEC-Q100 (per Arrow listing) —
RoHS स्थिति Compliant (Green product) —
Packing Tape & Reel (T&R) —
MSL स्तर [DATA_NEEDED: MSL rating] —
Product Type — Smart High-Side Power Switch
On-State Resistance (R_DS(on)) — 50 mOhm (typical)
Continuous Load Current — 5.8 A
ऑपरेटिंग सप्लाई वोल्टेज — [DATA_NEEDED: nominal and range]
Standby Current — Very low (per datasheet)
Overvoltage Protection — Load-dump / overvoltage clamp
Overtemperature Protection — Yes, with autorestart
Diagnostic Feedback — Yes (open-load, short-circuit, overtemperature)
RoHS / Pb-Free — Yes (Green product, Pb-free finish, J-STD-020)
Soldering — Pb-free reflow per IPC/JEDEC J-STD-020
Qualification — Automotive-grade (PROFET family)

डेटाशीट और संसाधन

सभी उत्पादों को देखें BOM बनाएं कीट की अनुरोध