BTS134DATMA1 vs BTS428L2ATMA1 موازنہ

تفصیلی ساتھ ساتھ موازنہ از BTS134DATMA1 بذریعہ Infineon اور BTS428L2ATMA1 بذریعہ Infineon. اہم خصوصیات، برقی پیرامیٹرز، پیکیجنگ، لائف سائیکل اسٹیٹس، قیمتوں اور دستیابی کا موازنہ کریں تاکہ آپ کی ڈیزائن ضروریات کے لیے بہترین کمپوننٹ کا تعین ہو سکے۔

Infineon
BTS428L2ATMA1 BTS428L2ATMA1 - 5.8A Smart High-Side Switch | Infineon

BTS428L2ATMA1 - 5.8A Smart High-Side Switch | Infineon

BTS428L2ATMA1 ✓ فعال

خصوصیات کا موازنہ

پیرامیٹر BTS134DATMA1 BTS428L2ATMA1
برانڈ Infineon Infineon
زمرہ Power MOSFET Drivers Power MOSFET Drivers
لائف سائیکل کی حالت فعال فعال
Manufacturer Infineon Technologies —
Product Series HITFET (BTS134) —
Switch Type N-Channel Low-Side Smart Power Switch —
Technology Smart SIPMOS (vertical DMOS + protection IC) Smart SIPMOS (vertical N-channel MOSFET with charge pump)
Input Type Logic Level CMOS-compatible, ground-referenced
Number of Channels 1 1
آؤٹ پٹ کنفیگریشن Low-Side —
Continuous Drain Current (ID) 3.5 A —
Operating Voltage (VLoad) 42 V (max) —
Drain-Source Voltage (VDS) 42 V —
On-State Resistance (RDS(on)) [DATA_NEEDED: RDS(on) at VGS=5V, TJ=25C] —
Input Logic Threshold (VIH/VIL) Logic-level (3.3 V / 5 V compatible GPIO) —
ESD Protection (Input Pin) Yes (embedded) —
تھرمل شٹ ڈاؤن Yes (auto-restart) —
Current Limitation Yes —
Overload Protection Yes —
Short-Circuit Protection Yes —
Overvoltage Protection (Load Dump) Yes —
پیکیج PG-TO252-3-11 (DPAK, 2 leads + tab, SC-63) PG-TO252-5-11 (DPAK-5, 4 leads + tab)
ماؤنٹنگ ٹائپ Surface Mount Surface Mount
آپریٹنگ درجہ حرارت رینج [DATA_NEEDED: TJ min/max -40C to +150C is typical for HITFET] [DATA_NEEDED: min/max]
Automotive Qualification AEC-Q100 (per Arrow listing) —
RoHS اسٹیٹس Compliant (Green product) —
Packing Tape & Reel (T&R) —
MSL لیول [DATA_NEEDED: MSL rating] —
Product Type — Smart High-Side Power Switch
On-State Resistance (R_DS(on)) — 50 mOhm (typical)
Continuous Load Current — 5.8 A
آپریٹنگ سپلائی وولٹیج — [DATA_NEEDED: nominal and range]
Standby Current — Very low (per datasheet)
Overvoltage Protection — Load-dump / overvoltage clamp
Overtemperature Protection — Yes, with autorestart
Diagnostic Feedback — Yes (open-load, short-circuit, overtemperature)
RoHS / Pb-Free — Yes (Green product, Pb-free finish, J-STD-020)
Soldering — Pb-free reflow per IPC/JEDEC J-STD-020
Qualification — Automotive-grade (PROFET family)

Datasheets اور وسائل

تمام مصنوعات براؤز کریں BOM بنائیں قیمت کی درخواست کریں