BTS134DATMA1 vs BTS428L2ATMA1 Perbandingan
Perbandingan bersamaan detil BTS134DATMA1 dari Infineon dan BTS428L2ATMA1 dari Infineon. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Perbandingan Spesifikasi
| Parameter Umum | BTS134DATMA1 | BTS428L2ATMA1 |
|---|---|---|
| Merek | Infineon | Infineon |
| Kategori | Power MOSFET Drivers | Power MOSFET Drivers |
| Status Lingkungan Hidup | Aktif | Aktif |
| Manufacturer | Infineon Technologies | — |
| Product Series | HITFET (BTS134) | — |
| Switch Type | N-Channel Low-Side Smart Power Switch | — |
| Technology | Smart SIPMOS (vertical DMOS + protection IC) | Smart SIPMOS (vertical N-channel MOSFET with charge pump) |
| Input Type | Logic Level | CMOS-compatible, ground-referenced |
| Number of Channels | 1 | 1 |
| Konfigurasi Output | Low-Side | — |
| Continuous Drain Current (ID) | 3.5 A | — |
| Operating Voltage (VLoad) | 42 V (max) | — |
| Drain-Source Voltage (VDS) | 42 V | — |
| On-State Resistance (RDS(on)) | [DATA_NEEDED: RDS(on) at VGS=5V, TJ=25C] | — |
| Input Logic Threshold (VIH/VIL) | Logic-level (3.3 V / 5 V compatible GPIO) | — |
| ESD Protection (Input Pin) | Yes (embedded) | — |
| Penutupan Panas | Yes (auto-restart) | — |
| Current Limitation | Yes | — |
| Overload Protection | Yes | — |
| Short-Circuit Protection | Yes | — |
| Overvoltage Protection (Load Dump) | Yes | — |
| Paket | PG-TO252-3-11 (DPAK, 2 leads + tab, SC-63) | PG-TO252-5-11 (DPAK-5, 4 leads + tab) |
| Tipe Mounting | Surface Mount | Surface Mount |
| Rentang Suhu Kerja | [DATA_NEEDED: TJ min/max -40C to +150C is typical for HITFET] | [DATA_NEEDED: min/max] |
| Automotive Qualification | AEC-Q100 (per Arrow listing) | — |
| Status RoHS | Compliant (Green product) | — |
| Packing | Tape & Reel (T&R) | — |
| Level MSL | [DATA_NEEDED: MSL rating] | — |
| Product Type | — | Smart High-Side Power Switch |
| On-State Resistance (R_DS(on)) | — | 50 mOhm (typical) |
| Continuous Load Current | — | 5.8 A |
| Tegangan Pemuat Kerja | — | [DATA_NEEDED: nominal and range] |
| Standby Current | — | Very low (per datasheet) |
| Overvoltage Protection | — | Load-dump / overvoltage clamp |
| Overtemperature Protection | — | Yes, with autorestart |
| Diagnostic Feedback | — | Yes (open-load, short-circuit, overtemperature) |
| RoHS / Pb-Free | — | Yes (Green product, Pb-free finish, J-STD-020) |
| Soldering | — | Pb-free reflow per IPC/JEDEC J-STD-020 |
| Qualification | — | Automotive-grade (PROFET family) |