BTS3125TFATMA1 vs BTS3035TFATMA1 तुलना
विस्तृत दोनों ओर की तुलना BTS3125TFATMA1 द्वारा Infineon और BTS3035TFATMA1 द्वारा Infineon. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
विशेषता तुलना
| पैरामीटर | BTS3125TFATMA1 | BTS3035TFATMA1 |
|---|---|---|
| ब्रांड | Infineon | Infineon |
| श्रेणी | Power MOSFET Drivers | Power MOSFET Drivers |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| Product Type | Single-channel N-channel low-side smart power switch | Low-Side Power Switch |
| Load Current (continuous) | 2 A | — |
| Load Current (pulsed) | [DATA_NEEDED: pulsed drain current limit] | — |
| RDS(on) typical | 250 mΩ at 5 V Vbb | — |
| Supply Voltage (Vbb, nominal) | 5 V | — |
| Supply Voltage (Vbb, operating) | 5 V to 28 V | — |
| Load Dump Transient Protection | 40 V | — |
| Input Logic Compatibility | 3.3 V / 5 V CMOS | — |
| On-State Resistance (max) | [DATA_NEEDED: maximum RDS(on) over temp] | — |
| थर्मल रेज़िस्टेंस, जंक्शन-टू-एम्बिएंट | [DATA_NEEDED: theta_JA value] | — |
| ऑपरेटिंग तापमान रेंज | -40°C to +150°C | -40C to +150C (junction) |
| Over-temperature Shutdown | ~150°C with auto-restart | — |
| Short-Circuit Protection | Yes, current-limited | — |
| Over-voltage Protection | Yes (clamping at 40 V) | — |
| ESD Protection | Yes (per IEC 61000-4-2, [DATA_NEEDED: contact/air kV rating]) | — |
| Status Flag Output | Yes (fault feedback) | — |
| पैकेज | PG-TO252-3-313 (DPAK, SC-63) | PG-TO252-3-313 (DPAK) |
| माउंटिंग प्रकार | Surface Mount | Surface Mount |
| MSL स्तर | [DATA_NEEDED: MSL moisture sensitivity level] | [DATA_NEEDED: MSL moisture sensitivity level] |
| RoHS स्थिति | Compliant | Compliant |
| Technology | — | N-Channel MOSFET |
| Number of Channels | — | 1 |
| Input Type | — | CMOS Logic Level |
| Continuous Drain Current | — | 5 A |
| On-Resistance (RDS(on)) | — | 30 mOhm (typical) |
| Drain-Source Voltage (VDS) Max | — | 40 V |
| Operating Voltage Range | — | 12 V nominal (load-dump tolerant to 40 V) |
| Fault Protection | — | Over-current, Short-circuit, Over-temperature, ESD |
| Status Feedback | — | Yes (open-drain diagnostic output) |
| Reverse Battery Protection | — | Integrated |
| Automotive Grade | — | AEC-Q100 qualified |