BTS3125TFATMA1 vs BTS3035TFATMA1 مقایسه
مقایسه دقیق کنار به کنار BTS3125TFATMA1 توسط Infineon و BTS3035TFATMA1 توسط Infineon. مشخصات کلیدی، پارامترهای الکتریکی، بسته‌بندی، وضعیت چرخه عمر، قیمت‌گذاری و موجودی را مقایسه کنید تا بهترین قطعه را برای نیازهای طراحی خود تعیین کنید.
مقایسه مشخصات
| پارامتر | BTS3125TFATMA1 | BTS3035TFATMA1 |
|---|---|---|
| برند | Infineon | Infineon |
| دسته‌بندی | Power MOSFET Drivers | Power MOSFET Drivers |
| وضعیت چرخه عمر | فعال | فعال |
| Product Type | Single-channel N-channel low-side smart power switch | Low-Side Power Switch |
| Load Current (continuous) | 2 A | — |
| Load Current (pulsed) | [DATA_NEEDED: pulsed drain current limit] | — |
| RDS(on) typical | 250 mΩ at 5 V Vbb | — |
| Supply Voltage (Vbb, nominal) | 5 V | — |
| Supply Voltage (Vbb, operating) | 5 V to 28 V | — |
| Load Dump Transient Protection | 40 V | — |
| Input Logic Compatibility | 3.3 V / 5 V CMOS | — |
| On-State Resistance (max) | [DATA_NEEDED: maximum RDS(on) over temp] | — |
| مقاومت حرارتی، اتصال به محیط | [DATA_NEEDED: theta_JA value] | — |
| محدوده دمای کاری | -40°C to +150°C | -40C to +150C (junction) |
| Over-temperature Shutdown | ~150°C with auto-restart | — |
| Short-Circuit Protection | Yes, current-limited | — |
| Over-voltage Protection | Yes (clamping at 40 V) | — |
| ESD Protection | Yes (per IEC 61000-4-2, [DATA_NEEDED: contact/air kV rating]) | — |
| Status Flag Output | Yes (fault feedback) | — |
| بسته‌بندی | PG-TO252-3-313 (DPAK, SC-63) | PG-TO252-3-313 (DPAK) |
| نوع نصب | Surface Mount | Surface Mount |
| سطح MSL | [DATA_NEEDED: MSL moisture sensitivity level] | [DATA_NEEDED: MSL moisture sensitivity level] |
| وضعیت RoHS | Compliant | Compliant |
| Technology | — | N-Channel MOSFET |
| Number of Channels | — | 1 |
| Input Type | — | CMOS Logic Level |
| Continuous Drain Current | — | 5 A |
| On-Resistance (RDS(on)) | — | 30 mOhm (typical) |
| Drain-Source Voltage (VDS) Max | — | 40 V |
| Operating Voltage Range | — | 12 V nominal (load-dump tolerant to 40 V) |
| Fault Protection | — | Over-current, Short-circuit, Over-temperature, ESD |
| Status Feedback | — | Yes (open-drain diagnostic output) |
| Reverse Battery Protection | — | Integrated |
| Automotive Grade | — | AEC-Q100 qualified |