BTS3125TFATMA1 vs BTS3035TFATMA1 Pengandingan
Pengandingan Sisi Kiri Sisi Kanan Terperinci BTS3125TFATMA1 disebabkan oleh Infineon dan BTS3035TFATMA1 disebabkan oleh Infineon. Bandingkan spesifikasi utama, parameter elektrik, pakej, status kehidupan, harga, dan keupayaan untuk menentukan komponen terbaik untuk keperluan disenjaya anda.
Pengandingan Spesifikasi
| Parametr | BTS3125TFATMA1 | BTS3035TFATMA1 |
|---|---|---|
| Merek | Infineon | Infineon |
| Kategori | Power MOSFET Drivers | Power MOSFET Drivers |
| Status Lingkungan Hidup | Aktif | Aktif |
| Product Type | Single-channel N-channel low-side smart power switch | Low-Side Power Switch |
| Load Current (continuous) | 2 A | — |
| Load Current (pulsed) | [DATA_NEEDED: pulsed drain current limit] | — |
| RDS(on) typical | 250 mΩ at 5 V Vbb | — |
| Supply Voltage (Vbb, nominal) | 5 V | — |
| Supply Voltage (Vbb, operating) | 5 V to 28 V | — |
| Load Dump Transient Protection | 40 V | — |
| Input Logic Compatibility | 3.3 V / 5 V CMOS | — |
| On-State Resistance (max) | [DATA_NEEDED: maximum RDS(on) over temp] | — |
| Tegangan Panas, Hubungan ke Lingkungan | [DATA_NEEDED: theta_JA value] | — |
| Gambaran Suhu Operasi | -40°C to +150°C | -40C to +150C (junction) |
| Over-temperature Shutdown | ~150°C with auto-restart | — |
| Short-Circuit Protection | Yes, current-limited | — |
| Over-voltage Protection | Yes (clamping at 40 V) | — |
| ESD Protection | Yes (per IEC 61000-4-2, [DATA_NEEDED: contact/air kV rating]) | — |
| Status Flag Output | Yes (fault feedback) | — |
| Kemasan | PG-TO252-3-313 (DPAK, SC-63) | PG-TO252-3-313 (DPAK) |
| Jenis Pemasangan | Surface Mount | Surface Mount |
| Aras MSL | [DATA_NEEDED: MSL moisture sensitivity level] | [DATA_NEEDED: MSL moisture sensitivity level] |
| Status RoHS | Compliant | Compliant |
| Technology | — | N-Channel MOSFET |
| Number of Channels | — | 1 |
| Input Type | — | CMOS Logic Level |
| Continuous Drain Current | — | 5 A |
| On-Resistance (RDS(on)) | — | 30 mOhm (typical) |
| Drain-Source Voltage (VDS) Max | — | 40 V |
| Operating Voltage Range | — | 12 V nominal (load-dump tolerant to 40 V) |
| Fault Protection | — | Over-current, Short-circuit, Over-temperature, ESD |
| Status Feedback | — | Yes (open-drain diagnostic output) |
| Reverse Battery Protection | — | Integrated |
| Automotive Grade | — | AEC-Q100 qualified |