BTS428L2 vs BTS500151TADATMA2 तुलना

विस्तृत दोनों ओर की तुलना BTS428L2 द्वारा Infineon और BTS500151TADATMA2 द्वारा Infineon. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。

Infineon
BTS428L2 BTS428L2 - 24V Smart High-Side Switch 5.8A | Infineon PROFET

BTS428L2 - 24V Smart High-Side Switch 5.8A | Infineon PROFET

BTS428L2 ✓ सक्रिय
Infineon
BTS500151TADATMA2 BTS500151TADATMA2 - 33A High-Side N-Channel Power Switch | Infineon

BTS500151TADATMA2 - 33A High-Side N-Channel Power Switch | Infineon

BTS500151TADATMA2 ✓ सक्रिय

विशेषता तुलना

पैरामीटर BTS428L2 BTS500151TADATMA2
ब्रांड Infineon Infineon
श्रेणी Power MOSFET Drivers Power MOSFET Drivers
लाइफसाइकिल स्थिति सक्रिय सक्रिय
Product Type Smart High-Side Power Switch (Classic PROFET) —
टोपोलॉजी Single-channel high-side N-channel MOSFET with charge pump —
Nominal Operating Voltage 24 V (automotive 12 V/24 V board net) —
Maximum Continuous Load Current 5.8 A —
On-State Resistance (RDS(on)) 60 mΩ (typical) [DATA_NEEDED: RDS(on) at 25C and Tj=150C]
Number of Channels 1 —
Status Feedback Yes (dedicated status pin) —
ओवरकरंट प्रोटेक्शन Yes (integrated) —
Short-Circuit Protection Yes (integrated) —
Overtemperature Protection Yes (integrated thermal shutdown) —
Overvoltage Protection Yes (load-dump tolerant) —
Reverse Battery Protection Yes (integrated) —
Standby Current Low standby current (green/RoHS-compliant device) —
ऑपरेटिंग तापमान रेंज -40 °C to +150 °C -40C to +150C (junction)
पैकेज PG-TO252-5-11 (TO-252 / DPAK, 5 leads) PG-TO-263-7-10 (D2PAK, 6 leads + tab)
माउंटिंग प्रकार Surface Mount Surface Mount
RoHS Compliance Compliant (Pb-free, green product, IPC/JEDEC J-STD-020) —
Switch Type — High-Side Power Switch (PROFET+ 12V / HIC-PROFET)
आउटपुट की संख्या — 1
Internal MOSFET Configuration — N-Channel
Continuous Load Current — 33 A
Output Peak Current Limit — 39 A (typ)
Input Voltage Range (Vbb) — -0.3 V to 28 V (operating typically 5 V to 18 V)
Protection Features — Over-current, Over-temperature, Over-voltage, Reverse Battery, Ground Loss, Open-Load detection
Diagnostic Output — Yes (Status pin)
MSL स्तर — [DATA_NEEDED: MSL rating]
RoHS स्थिति — Compliant
Automotive Qualification — AEC-Q100 qualified
पिन की संख्या — 7 (6 + tab)

डेटाशीट और संसाधन

सभी उत्पादों को देखें BOM बनाएं कीट की अनुरोध