BTS5014SDAAUMA1 vs BTS4130QGAXUMA1 तुलना
विस्तृत दोनों ओर की तुलना BTS5014SDAAUMA1 द्वारा Infineon और BTS4130QGAXUMA1 द्वारा Infineon. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
विशेषता तुलना
| पैरामीटर | BTS5014SDAAUMA1 | BTS4130QGAXUMA1 |
|---|---|---|
| ब्रांड | Infineon | Infineon |
| श्रेणी | Power MOSFET Drivers | Power MOSFET Drivers |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| यूनिट मूल्य (USD) | — | $1.86 |
| Product Type | Smart High-Side Power Switch | Quad Smart High-Side Power Switch |
| Number of Channels | 1 | 4 |
| टोपोलॉजी | N-Channel vertical power MOSFET with charge pump | High-Side N-Channel MOSFET with charge pump |
| Nominal Load Current | 6 A | — |
| ऑपरेटिंग सप्लाई वोल्टेज | 5 V to 28 V (load-dump tolerant to 41 V) | 6 V to 18 V (extended to 28 V transient) |
| On-State Resistance (RDS(on)) | [DATA_NEEDED: RDS(on) at 25C] | — |
| Standby Current | [DATA_NEEDED: standby current uA] | — |
| करंट लिमिट | [DATA_NEEDED: ICL typical] | — |
| ऑपरेटिंग तापमान रेंज | -40 C to +150 C (junction) | -40 C to +150 C junction |
| पैकेज | PG-TO252-5-11 (DPAK-5, 4 leads + tab) | PG-DSO-20-32 (20-pin DSO, 7.50 mm width) |
| माउंटिंग प्रकार | Surface Mount | Surface Mount |
| Load Type | Resistive, inductive, capacitive | — |
| Diagnostic Features | Current sense (IS), fault status (ST), open-drain | — |
| Protection Functions | Over-current, over-temperature, over-voltage, ESD | — |
| ESD Protection | [DATA_NEEDED: HBM/CDM rating] | — |
| RoHS स्थिति | Compliant | Compliant |
| Process Technology | Infineon SMART7 | — |
| Continuous Load Current per Channel | — | 2.1 A |
| On-State Resistance R_DS(on) per Channel | — | 130 mOhm typical |
| Overvoltage Clamp (Load Dump) | — | 45 V typical |
| Quiescent Current (Standby) | — | [DATA_NEEDED: quiescent current value] |
| Automotive Qualification | — | AEC-Q100 qualified |
| Protection Features | — | Current limit, overtemperature shutdown, overvoltage clamp, reverse battery |
| Diagnostic Output | — | Status feedback pin |
| MSL स्तर | — | 3 (per JEDEC J-STD-020) |