BTS5014SDAAUMA1 vs BTS4130QGAXUMA1 Perbandingan
Perbandingan bersamaan detil BTS5014SDAAUMA1 dari Infineon dan BTS4130QGAXUMA1 dari Infineon. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Perbandingan Spesifikasi
| Parameter Umum | BTS5014SDAAUMA1 | BTS4130QGAXUMA1 |
|---|---|---|
| Merek | Infineon | Infineon |
| Kategori | Power MOSFET Drivers | Power MOSFET Drivers |
| Status Lingkungan Hidup | Aktif | Aktif |
| Harga Unit (USD) | — | $1,86 |
| Product Type | Smart High-Side Power Switch | Quad Smart High-Side Power Switch |
| Number of Channels | 1 | 4 |
| Topologi | N-Channel vertical power MOSFET with charge pump | High-Side N-Channel MOSFET with charge pump |
| Nominal Load Current | 6 A | — |
| Tegangan Pemuat Kerja | 5 V to 28 V (load-dump tolerant to 41 V) | 6 V to 18 V (extended to 28 V transient) |
| On-State Resistance (RDS(on)) | [DATA_NEEDED: RDS(on) at 25C] | — |
| Standby Current | [DATA_NEEDED: standby current uA] | — |
| Batas Arus | [DATA_NEEDED: ICL typical] | — |
| Rentang Suhu Kerja | -40 C to +150 C (junction) | -40 C to +150 C junction |
| Paket | PG-TO252-5-11 (DPAK-5, 4 leads + tab) | PG-DSO-20-32 (20-pin DSO, 7.50 mm width) |
| Tipe Mounting | Surface Mount | Surface Mount |
| Load Type | Resistive, inductive, capacitive | — |
| Diagnostic Features | Current sense (IS), fault status (ST), open-drain | — |
| Protection Functions | Over-current, over-temperature, over-voltage, ESD | — |
| ESD Protection | [DATA_NEEDED: HBM/CDM rating] | — |
| Status RoHS | Compliant | Compliant |
| Process Technology | Infineon SMART7 | — |
| Continuous Load Current per Channel | — | 2.1 A |
| On-State Resistance R_DS(on) per Channel | — | 130 mOhm typical |
| Overvoltage Clamp (Load Dump) | — | 45 V typical |
| Quiescent Current (Standby) | — | [DATA_NEEDED: quiescent current value] |
| Automotive Qualification | — | AEC-Q100 qualified |
| Protection Features | — | Current limit, overtemperature shutdown, overvoltage clamp, reverse battery |
| Diagnostic Output | — | Status feedback pin |
| Level MSL | — | 3 (per JEDEC J-STD-020) |