BTS70202EPAXUMA1 vs BTS70081EPAXUMA1 तुलना

विस्तृत दोनों ओर की तुलना BTS70202EPAXUMA1 द्वारा Infineon और BTS70081EPAXUMA1 द्वारा Infineon. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。

Infineon
BTS70202EPAXUMA1 BTS70202EPAXUMA1 - 5A Dual High-Side Smart Switch | Infineon

BTS70202EPAXUMA1 - 5A Dual High-Side Smart Switch | Infineon

BTS70202EPAXUMA1 ✓ सक्रिय
Infineon
BTS70081EPAXUMA1 BTS70081EPAXUMA1 - 10A Smart High-Side Switch | Infineon PROFET

BTS70081EPAXUMA1 - 10A Smart High-Side Switch | Infineon PROFET

BTS70081EPAXUMA1 ✓ सक्रिय

विशेषता तुलना

पैरामीटर BTS70202EPAXUMA1 BTS70081EPAXUMA1
ब्रांड Infineon Infineon
श्रेणी Power MOSFET Drivers Power MOSFET Drivers
लाइफसाइकिल स्थिति सक्रिय सक्रिय
Product Type Smart High-Side Power Switch (dual channel) Smart High-Side Power Switch (PROFET)
Technology SMART7 (PROFET family) —
Number of Channels 2 —
आउटपुट कॉन्फ़िगरेशन High-side, 1:1 N-Channel MOSFET per channel —
Continuous Load Current (per channel) 2.5 A —
Total Device Load Current 5 A —
On-State Resistance (typ, per channel) 30 mΩ —
Operating Voltage Range (Vbb) 6 V to 18 V (load dump tolerant) —
Current Limit (typ) 12 A (selectable) —
Diagnostic Output Analog current sense (IS pin) per channel Open-drain status / current sense
Protection Features Over-current, short-circuit, over-temperature, over-voltage, reverse battery, loss of ground Reverse battery, over-load, short-circuit, over-temperature, over-voltage clamp, ground loss
Input Logic Compatibility 3.3 V and 5 V CMOS —
पैकेज PG-TSDSO-14-22 (exposed pad) PG-TSDSO-14-22 (14-pin, exposed pad)
माउंटिंग प्रकार Surface Mount Surface Mount
ऑपरेटिंग तापमान रेंज -40 C to +150 C (junction) -40 C to +150 C (Tj)
Packing Tape & Reel (XUMA1 suffix) —
RoHS स्थिति Compliant Compliant
टोपोलॉजी — 1:1 N-Channel High-Side Switch
Continuous Load Current — 10 A
On-State Resistance (RDS(on) typ.) — 9 mOhm
ऑपरेटिंग सप्लाई वोल्टेज — 6 V to 18 V
Load-Dump Survival Voltage — 28 V (per AEC-Q100)
Standby Current — [DATA_NEEDED: standby current in uA]
Current Limitation (typ.) — [DATA_NEEDED: IL(LIM) value]
Package Width — 3.90 mm (TSSOP-14 EP equivalent)
AEC-Q100 Qualification — Qualified (automotive grade)
MSL स्तर — [DATA_NEEDED: MSL rating]
Lead-Free — Yes

डेटाशीट और संसाधन

सभी उत्पादों को देखें BOM बनाएं कीट की अनुरोध