BTS70202EPAXUMA1 vs BTS70081EPAXUMA1 So sánh

So sánh chi tiết song song của BTS70202EPAXUMA1 bằng Infineon và BTS70081EPAXUMA1 bằng Infineon. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.

Infineon
BTS70202EPAXUMA1 BTS70202EPAXUMA1 - 5A Dual High-Side Smart Switch | Infineon

BTS70202EPAXUMA1 - 5A Dual High-Side Smart Switch | Infineon

BTS70202EPAXUMA1 ✓ Hoạt động
Infineon
BTS70081EPAXUMA1 BTS70081EPAXUMA1 - 10A Smart High-Side Switch | Infineon PROFET

BTS70081EPAXUMA1 - 10A Smart High-Side Switch | Infineon PROFET

BTS70081EPAXUMA1 ✓ Hoạt động

So sánh thông số kỹ thuật

Tham số BTS70202EPAXUMA1 BTS70081EPAXUMA1
Thương hiệu Infineon Infineon
Danh mục Power MOSFET Drivers Power MOSFET Drivers
Trạng thái vòng đời Hoạt động Hoạt động
Product Type Smart High-Side Power Switch (dual channel) Smart High-Side Power Switch (PROFET)
Technology SMART7 (PROFET family) —
Number of Channels 2 —
Cấu hình đầu ra High-side, 1:1 N-Channel MOSFET per channel —
Continuous Load Current (per channel) 2.5 A —
Total Device Load Current 5 A —
On-State Resistance (typ, per channel) 30 mΩ —
Operating Voltage Range (Vbb) 6 V to 18 V (load dump tolerant) —
Current Limit (typ) 12 A (selectable) —
Diagnostic Output Analog current sense (IS pin) per channel Open-drain status / current sense
Protection Features Over-current, short-circuit, over-temperature, over-voltage, reverse battery, loss of ground Reverse battery, over-load, short-circuit, over-temperature, over-voltage clamp, ground loss
Input Logic Compatibility 3.3 V and 5 V CMOS —
Hộp PG-TSDSO-14-22 (exposed pad) PG-TSDSO-14-22 (14-pin, exposed pad)
Kiểu lắp đặt Surface Mount Surface Mount
Khoảng nhiệt độ hoạt động -40 C to +150 C (junction) -40 C to +150 C (Tj)
Packing Tape & Reel (XUMA1 suffix) —
Trạng thái RoHS Compliant Compliant
Cấu trúc — 1:1 N-Channel High-Side Switch
Continuous Load Current — 10 A
On-State Resistance (RDS(on) typ.) — 9 mOhm
Điện áp cung cấp hoạt động — 6 V to 18 V
Load-Dump Survival Voltage — 28 V (per AEC-Q100)
Standby Current — [DATA_NEEDED: standby current in uA]
Current Limitation (typ.) — [DATA_NEEDED: IL(LIM) value]
Package Width — 3.90 mm (TSSOP-14 EP equivalent)
AEC-Q100 Qualification — Qualified (automotive grade)
Cấp MSL — [DATA_NEEDED: MSL rating]
Lead-Free — Yes

Hồ sơ kỹ thuật & Tài nguyên

Xem tất cả sản phẩm Tạo BOM Yêu cầu báo giá