BTS70402EPGXUMA1 vs BTH62001ENAXUMA1 तुलना
विस्तृत दोनों ओर की तुलना BTS70402EPGXUMA1 द्वारा Infineon और BTH62001ENAXUMA1 द्वारा Infineon. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
Infineon
BTH62001ENAXUMA1 - 48V 200mΩ 1.7A Smart High-Side Switch | Infineon
BTH62001ENAXUMA1 ✓ सक्रियविशेषता तुलना
| पैरामीटर | BTS70402EPGXUMA1 | BTH62001ENAXUMA1 |
|---|---|---|
| ब्रांड | Infineon | Infineon |
| श्रेणी | Power MOSFET Drivers | Power MOSFET Drivers |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| Manufacturer | Infineon Technologies | Infineon Technologies |
| Part Family | PROFET+2 (BTS70xxx series) | — |
| फ़ंक्शन | Smart High-Side Power Switch | Smart High-Side Power Switch |
| Number of Channels | 4 | — |
| आउटपुट कॉन्फ़िगरेशन | High-side, N-channel MOSFET | High-Side |
| Continuous Load Current per Channel | 3.5 A (typical) | — |
| On-State Resistance (Ron) per Channel | 65 mOhm typical | — |
| Operating Voltage Range | 6 V to 18 V nominal (load-dump tolerant to 40 V) | 8 V to 60 V |
| Logic Supply Voltage | 3.3 V / 5 V compatible MCU I/O | — |
| Protection Features | Current limit, overtemperature shutdown, overvoltage, reverse battery, short-to-ground, short-to-battery, open-load detection | Over-current, over-temperature, over-voltage, load-dump, reverse battery |
| Diagnostic Interface | SPI status register, current-sense feedback | — |
| ऑपरेटिंग तापमान रेंज | -40 °C to +150 °C junction | -40 °C to +150 °C (junction) |
| पैकेज | PG-TSDSO-14 (exposed thermal pad) | PG-TDSO-8-31 |
| माउंटिंग प्रकार | Surface Mount | Surface Mount |
| AEC-Q100 Qualification | Qualified (automotive grade) | — |
| RoHS Compliance | Compliant | — |
| Product Family | — | PROFET™ + 48V |
| चैनल | — | 1 |
| On-State Resistance (RDS(on) @ 25 °C) | — | 200 mΩ (typical) |
| Continuous Load Current | — | 1.7 A |
| Input Type | — | Active-High / Active-Low |
| Current Sense | — | Analog proportional output |
| Automotive Qualification | — | AEC-Q100 |
| Functional Safety | — | ISO 26262-ready |
| RoHS स्थिति | — | Compliant |