BTS70402EPGXUMA1 vs BTH62001ENAXUMA1 Perbandingan
Perbandingan bersamaan detil BTS70402EPGXUMA1 dari Infineon dan BTH62001ENAXUMA1 dari Infineon. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Infineon
BTH62001ENAXUMA1 - 48V 200mΩ 1.7A Smart High-Side Switch | Infineon
BTH62001ENAXUMA1 ✓ AktifPerbandingan Spesifikasi
| Parameter Umum | BTS70402EPGXUMA1 | BTH62001ENAXUMA1 |
|---|---|---|
| Merek | Infineon | Infineon |
| Kategori | Power MOSFET Drivers | Power MOSFET Drivers |
| Status Lingkungan Hidup | Aktif | Aktif |
| Manufacturer | Infineon Technologies | Infineon Technologies |
| Part Family | PROFET+2 (BTS70xxx series) | — |
| Fungsi | Smart High-Side Power Switch | Smart High-Side Power Switch |
| Number of Channels | 4 | — |
| Konfigurasi Output | High-side, N-channel MOSFET | High-Side |
| Continuous Load Current per Channel | 3.5 A (typical) | — |
| On-State Resistance (Ron) per Channel | 65 mOhm typical | — |
| Operating Voltage Range | 6 V to 18 V nominal (load-dump tolerant to 40 V) | 8 V to 60 V |
| Logic Supply Voltage | 3.3 V / 5 V compatible MCU I/O | — |
| Protection Features | Current limit, overtemperature shutdown, overvoltage, reverse battery, short-to-ground, short-to-battery, open-load detection | Over-current, over-temperature, over-voltage, load-dump, reverse battery |
| Diagnostic Interface | SPI status register, current-sense feedback | — |
| Rentang Suhu Kerja | -40 °C to +150 °C junction | -40 °C to +150 °C (junction) |
| Paket | PG-TSDSO-14 (exposed thermal pad) | PG-TDSO-8-31 |
| Tipe Mounting | Surface Mount | Surface Mount |
| AEC-Q100 Qualification | Qualified (automotive grade) | — |
| RoHS Compliance | Compliant | — |
| Product Family | — | PROFET™ + 48V |
| Kanal | — | 1 |
| On-State Resistance (RDS(on) @ 25 °C) | — | 200 mΩ (typical) |
| Continuous Load Current | — | 1.7 A |
| Input Type | — | Active-High / Active-Low |
| Current Sense | — | Analog proportional output |
| Automotive Qualification | — | AEC-Q100 |
| Functional Safety | — | ISO 26262-ready |
| Status RoHS | — | Compliant |