BTS724GXUMA1 vs BTS5014SDAAUMA1 तुलना
विस्तृत दोनों ओर की तुलना BTS724GXUMA1 द्वारा Infineon और BTS5014SDAAUMA1 द्वारा Infineon. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
विशेषता तुलना
| पैरामीटर | BTS724GXUMA1 | BTS5014SDAAUMA1 |
|---|---|---|
| ब्रांड | Infineon | Infineon |
| श्रेणी | Power MOSFET Drivers | Power MOSFET Drivers |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| टोपोलॉजी | 4-channel high-side switch | N-Channel vertical power MOSFET with charge pump |
| आउटपुट की संख्या | 4 | — |
| आउटपुट कॉन्फ़िगरेशन | High-side | — |
| On-Resistance (RDS(on)) per Channel | 200 mOhm typical at 25 C | — |
| Continuous Load Current per Channel | 3 A | — |
| Supply Voltage (Vbb) | 5.5 V to 38 V | — |
| Operating Supply Voltage Range | 5.5 V to 38 V | — |
| Overvoltage Clamp (Vbb(AZ)) | Data needed - see datasheet | — |
| Standby Current | 8 mA typical (per datasheet family) | [DATA_NEEDED: standby current uA] |
| Input Type | CMOS-compatible, ground-referenced | — |
| Diagnostic Output | Yes - per-channel status flag | — |
| Protection Features | Overload, short-circuit, over-temperature, over-voltage | — |
| Demagnetization | Fast demagnetization for inductive loads | — |
| ऑपरेटिंग तापमान रेंज | -40 C to +150 C junction | -40 C to +150 C (junction) |
| पैकेज | PG-DSO-20 (20-pin, exposed thermal considerations) | PG-TO252-5-11 (DPAK-5, 4 leads + tab) |
| माउंटिंग प्रकार | Surface Mount | Surface Mount |
| MSL स्तर | 3 | — |
| RoHS स्थिति | Compliant | Compliant |
| Technology | Infineon Smart SIPMOS (vertical power MOSFET + charge pump) | — |
| Family | Classic PROFET 24V automotive smart high-side switch | — |
| Product Type | — | Smart High-Side Power Switch |
| Number of Channels | — | 1 |
| Nominal Load Current | — | 6 A |
| ऑपरेटिंग सप्लाई वोल्टेज | — | 5 V to 28 V (load-dump tolerant to 41 V) |
| On-State Resistance (RDS(on)) | — | [DATA_NEEDED: RDS(on) at 25C] |
| करंट लिमिट | — | [DATA_NEEDED: ICL typical] |
| Load Type | — | Resistive, inductive, capacitive |
| Diagnostic Features | — | Current sense (IS), fault status (ST), open-drain |
| Protection Functions | — | Over-current, over-temperature, over-voltage, ESD |
| ESD Protection | — | [DATA_NEEDED: HBM/CDM rating] |
| Process Technology | — | Infineon SMART7 |