BTS724GXUMA1 vs BTS5014SDAAUMA1 Karşılaştırma
Ayrıntılı yan yana karşılaştırma BTS724GXUMA1 tarafından Infineon ve BTS5014SDAAUMA1 tarafından InfineonAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.
Özellik Karşılaştırması
| Parametre | BTS724GXUMA1 | BTS5014SDAAUMA1 |
|---|---|---|
| Marka | Infineon | Infineon |
| Kategori | Power MOSFET Drivers | Power MOSFET Drivers |
| Yaşam Döngüsü Durumu | Aktif | Aktif |
| Ağ Yapısı | 4-channel high-side switch | N-Channel vertical power MOSFET with charge pump |
| Çıkış Sayısı | 4 | — |
| Çıkış Konfigürasyonu | High-side | — |
| On-Resistance (RDS(on)) per Channel | 200 mOhm typical at 25 C | — |
| Continuous Load Current per Channel | 3 A | — |
| Supply Voltage (Vbb) | 5.5 V to 38 V | — |
| Operating Supply Voltage Range | 5.5 V to 38 V | — |
| Overvoltage Clamp (Vbb(AZ)) | Data needed - see datasheet | — |
| Standby Current | 8 mA typical (per datasheet family) | [DATA_NEEDED: standby current uA] |
| Input Type | CMOS-compatible, ground-referenced | — |
| Diagnostic Output | Yes - per-channel status flag | — |
| Protection Features | Overload, short-circuit, over-temperature, over-voltage | — |
| Demagnetization | Fast demagnetization for inductive loads | — |
| İşletim Sıcaklığı Aralığı | -40 C to +150 C junction | -40 C to +150 C (junction) |
| Paket | PG-DSO-20 (20-pin, exposed thermal considerations) | PG-TO252-5-11 (DPAK-5, 4 leads + tab) |
| Montaj Türü | Surface Mount | Surface Mount |
| MSL Seviyesi | 3 | — |
| RoHS Durumu | Compliant | Compliant |
| Technology | Infineon Smart SIPMOS (vertical power MOSFET + charge pump) | — |
| Family | Classic PROFET 24V automotive smart high-side switch | — |
| Product Type | — | Smart High-Side Power Switch |
| Number of Channels | — | 1 |
| Nominal Load Current | — | 6 A |
| İşletim Besleme Gerilimi | — | 5 V to 28 V (load-dump tolerant to 41 V) |
| On-State Resistance (RDS(on)) | — | [DATA_NEEDED: RDS(on) at 25C] |
| Akım Sınırı | — | [DATA_NEEDED: ICL typical] |
| Load Type | — | Resistive, inductive, capacitive |
| Diagnostic Features | — | Current sense (IS), fault status (ST), open-drain |
| Protection Functions | — | Over-current, over-temperature, over-voltage, ESD |
| ESD Protection | — | [DATA_NEEDED: HBM/CDM rating] |
| Process Technology | — | Infineon SMART7 |