BTS724GXUMA1 vs BTS5014SDAAUMA1 Perbandingan
Perbandingan bersamaan detil BTS724GXUMA1 dari Infineon dan BTS5014SDAAUMA1 dari Infineon. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Perbandingan Spesifikasi
| Parameter Umum | BTS724GXUMA1 | BTS5014SDAAUMA1 |
|---|---|---|
| Merek | Infineon | Infineon |
| Kategori | Power MOSFET Drivers | Power MOSFET Drivers |
| Status Lingkungan Hidup | Aktif | Aktif |
| Topologi | 4-channel high-side switch | N-Channel vertical power MOSFET with charge pump |
| Jumlah Output | 4 | — |
| Konfigurasi Output | High-side | — |
| On-Resistance (RDS(on)) per Channel | 200 mOhm typical at 25 C | — |
| Continuous Load Current per Channel | 3 A | — |
| Supply Voltage (Vbb) | 5.5 V to 38 V | — |
| Operating Supply Voltage Range | 5.5 V to 38 V | — |
| Overvoltage Clamp (Vbb(AZ)) | Data needed - see datasheet | — |
| Standby Current | 8 mA typical (per datasheet family) | [DATA_NEEDED: standby current uA] |
| Input Type | CMOS-compatible, ground-referenced | — |
| Diagnostic Output | Yes - per-channel status flag | — |
| Protection Features | Overload, short-circuit, over-temperature, over-voltage | — |
| Demagnetization | Fast demagnetization for inductive loads | — |
| Rentang Suhu Kerja | -40 C to +150 C junction | -40 C to +150 C (junction) |
| Paket | PG-DSO-20 (20-pin, exposed thermal considerations) | PG-TO252-5-11 (DPAK-5, 4 leads + tab) |
| Tipe Mounting | Surface Mount | Surface Mount |
| Level MSL | 3 | — |
| Status RoHS | Compliant | Compliant |
| Technology | Infineon Smart SIPMOS (vertical power MOSFET + charge pump) | — |
| Family | Classic PROFET 24V automotive smart high-side switch | — |
| Product Type | — | Smart High-Side Power Switch |
| Number of Channels | — | 1 |
| Nominal Load Current | — | 6 A |
| Tegangan Pemuat Kerja | — | 5 V to 28 V (load-dump tolerant to 41 V) |
| On-State Resistance (RDS(on)) | — | [DATA_NEEDED: RDS(on) at 25C] |
| Batas Arus | — | [DATA_NEEDED: ICL typical] |
| Load Type | — | Resistive, inductive, capacitive |
| Diagnostic Features | — | Current sense (IS), fault status (ST), open-drain |
| Protection Functions | — | Over-current, over-temperature, over-voltage, ESD |
| ESD Protection | — | [DATA_NEEDED: HBM/CDM rating] |
| Process Technology | — | Infineon SMART7 |