EPC16QC100SS vs EPC16QC-100T तुलना

विस्तृत दोनों ओर की तुलना EPC16QC100SS द्वारा Intel और EPC16QC-100T द्वारा Altera. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。

Intel
EPC16QC100SS EPC16QC100SS - 16Mb Config PROM for FPGAs, PQFP-100 | Intel

EPC16QC100SS - 16Mb Config PROM for FPGAs, PQFP-100 | Intel

EPC16QC100SS ⚠ अंतिम खरीद

विशेषता तुलना

पैरामीटर EPC16QC100SS EPC16QC-100T
ब्रांड Intel Altera
श्रेणी Memory ICs Memory ICs
लाइफसाइकिल स्थिति अंतिम बार खरीदें Obsolete
मेमोरी प्रकार In-System Programmable Configuration PROM Flash Configuration PROM (in-system programmable)
मेमोरी आकार 16 Mb (16,777,216 bits) —
Configuration Interface Passive Serial / Passive Parallel Synchronous / Passive Parallel Asynchronous —
Operating Modes FPGA configuration storage, ISP via IEEE 1532 —
Supply Voltage (VCC) 3.3 V (SS suffix variant) —
I/O Logic Level 3.3V or 2.5V selectable via VCCSEL —
ऑपरेटिंग तापमान 0C to +70C (Commercial) [DATA_NEEDED: Operating temperature range]
पैकेज 100-pin PQFP (Plastic Quad Flat Pack), 20x14 mm 100-pin PQFP (20 x 14 mm), 0.65 mm pitch
माउंटिंग प्रकार Surface Mount Surface Mount
Compatible FPGAs Stratix, Stratix II, Cyclone, Cyclone II, APEX 20K, other Altera FPGAs requiring >8 Mbit configuration —
Programmability In-system programmable (IEEE 1532) —
MSL स्तर [DATA_NEEDED: MSL level] [DATA_NEEDED: Moisture sensitivity level]
RoHS स्थिति [DATA_NEEDED: RoHS status] unknown
Lead-Free [DATA_NEEDED: lead-free status] unknown
Manufacturer Intel (formerly Altera) —
Memory Density — 16 Mbit (2 Mbyte)
Supported FPGA Families — Stratix, APEX II, APEX 20K, Mercury, ACEX 1K, FLEX 10K
Configuration Data Width — 8-bit or 16-bit (cascaded dual-device mode)
Configuration Modes — Serial (single device), Parallel (two cascaded devices)
Data Compression Support — Yes (35% to 55% bitstream reduction typical)
JTAG / Boundary Scan — IEEE 1149.1 compliant, in-system programmable
सप्लाई वोल्टेज — 3.3 V
Cascade Interface — nCE / nOE handshake for multi-device chains
Programming Interface — JTAG (IEEE 1149.1) and serial
Endurance — [DATA_NEEDED: Program/erase cycle rating]
Data Retention — [DATA_NEEDED: Data retention specification]

डेटाशीट और संसाधन

सभी उत्पादों को देखें BOM बनाएं कीट की अनुरोध