EPC16QC100SS vs EPC16QC-100T 比較
詳細並排比較 EPC16QC100SS 由 Intel 與 EPC16QC-100T 由 Altera. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況，以找出最符合您設計需求的元件。
規格比較
| 參數 | EPC16QC100SS | EPC16QC-100T |
|---|---|---|
| 品牌 | Intel | Altera |
| 類別 | Memory ICs | Memory ICs |
| 生命週期狀態 | 最後購買 | Obsolete |
| 記憶體類型 | In-System Programmable Configuration PROM | Flash Configuration PROM (in-system programmable) |
| 記憶體容量 | 16 Mb (16,777,216 bits) | — |
| Configuration Interface | Passive Serial / Passive Parallel Synchronous / Passive Parallel Asynchronous | — |
| Operating Modes | FPGA configuration storage, ISP via IEEE 1532 | — |
| Supply Voltage (VCC) | 3.3 V (SS suffix variant) | — |
| I/O Logic Level | 3.3V or 2.5V selectable via VCCSEL | — |
| 工作溫度 | 0C to +70C (Commercial) | [DATA_NEEDED: Operating temperature range] |
| 封裝 | 100-pin PQFP (Plastic Quad Flat Pack), 20x14 mm | 100-pin PQFP (20 x 14 mm), 0.65 mm pitch |
| 安裝類型 | Surface Mount | Surface Mount |
| Compatible FPGAs | Stratix, Stratix II, Cyclone, Cyclone II, APEX 20K, other Altera FPGAs requiring >8 Mbit configuration | — |
| Programmability | In-system programmable (IEEE 1532) | — |
| MSL 等級 | [DATA_NEEDED: MSL level] | [DATA_NEEDED: Moisture sensitivity level] |
| RoHS 狀態 | [DATA_NEEDED: RoHS status] | unknown |
| Lead-Free | [DATA_NEEDED: lead-free status] | unknown |
| Manufacturer | Intel (formerly Altera) | — |
| Memory Density | — | 16 Mbit (2 Mbyte) |
| Supported FPGA Families | — | Stratix, APEX II, APEX 20K, Mercury, ACEX 1K, FLEX 10K |
| Configuration Data Width | — | 8-bit or 16-bit (cascaded dual-device mode) |
| Configuration Modes | — | Serial (single device), Parallel (two cascaded devices) |
| Data Compression Support | — | Yes (35% to 55% bitstream reduction typical) |
| JTAG / Boundary Scan | — | IEEE 1149.1 compliant, in-system programmable |
| 供應電壓 | — | 3.3 V |
| Cascade Interface | — | nCE / nOE handshake for multi-device chains |
| Programming Interface | — | JTAG (IEEE 1149.1) and serial |
| Endurance | — | [DATA_NEEDED: Program/erase cycle rating] |
| Data Retention | — | [DATA_NEEDED: Data retention specification] |