EPC1LI20 vs EPC1PCB तुलना
विस्तृत दोनों ओर की तुलना EPC1LI20 द्वारा Altera और EPC1PCB द्वारा Intel. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
विशेषता तुलना
| पैरामीटर | EPC1LI20 | EPC1PCB |
|---|---|---|
| ब्रांड | Altera | Intel |
| श्रेणी | Memory ICs | FPGA & CPLD |
| लाइफसाइकिल स्थिति | Obsolete | NRND |
| मेमोरी प्रकार | OTP Configuration PROM (EPROM-based) | — |
| मेमोरी आकार | 1 Mb (1,048,576 bits) | — |
| Configuration Interface | Altera Passive Serial / Altera Active Serial / JTAG (IEEE 1149.1) | — |
| Maximum Configuration Clock | 8 MHz | — |
| Supply Voltage (VCC) | 5.0 V (4.75 V to 5.25 V) | — |
| Programming Voltage (VPP) | 12.75 V (typical, factory-programmed via JTAG) | — |
| पैकेज | 20-pin PLCC (J-lead, 9x9 mm) | PLCC-20 (Plastic Leaded Chip Carrier) |
| पिन काउंट | 20 | — |
| ऑपरेटिंग तापमान | [DATA_NEEDED: operating temperature range] | — |
| Cascading Support | Yes (nCASC pin for multi-device daisy chain) | — |
| Endurance | OTP (one-time programmable, 1000 erase-equivalent UV cycles for pre-program erase) | — |
| JTAG Programming | Yes (in-system via IEEE 1149.1) | — |
| Compatible FPGA Families | FLEX 8000, FLEX 10K, ACEX 1K, APEX 20K, Mercury | — |
| माउंटिंग प्रकार | Surface Mount (PLCC socket compatible) | Surface Mount (socket-compatible) |
| MSL स्तर | 1 (per Partstack datasheet record) | — |
| RoHS स्थिति | [DATA_NEEDED: RoHS status - original Altera part may be non-RoHS SnPb finish] | [DATA_NEEDED: lead-free/RoHS status] |
| Product Type | — | Enhanced Configuration Device for SRAM-based FPGAs |
| Memory Density | — | 1 Mbit |
| Program Memory Type | — | Flash (non-volatile) |
| Configuration Modes Supported | — | FPP (Fast Passive Parallel), PS (Passive Serial) |
| Supply Voltage VCC | — | 3.3 V |
| I/O Voltage Tolerance | — | 5.0 V tolerant |
| Supported FPGA Families | — | APEX, FLEX, ACEX, Cyclone, Stratix |
| इंटरफ़ेस | — | Altera configuration bus (DATA, DCLK, nCONFIG, nSTATUS, CONF_DONE) |
| Multi-Device Daisy Chain | — | Yes (nCASC, nCS pins) |
| Programming Interface | — | JTAG (IEEE 1149.1 boundary scan) |
| In-System Programmable | — | Yes |
| Program/Erase Endurance | — | [DATA_NEEDED: program/erase cycles] |
| Data Retention | — | [DATA_NEEDED: data retention years] |