EPC2LC20-U vs EPC2LC20 तुलना
विस्तृत दोनों ओर की तुलना EPC2LC20-U द्वारा Altera और EPC2LC20 द्वारा Altera. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
विशेषता तुलना
| पैरामीटर | EPC2LC20-U | EPC2LC20 |
|---|---|---|
| ब्रांड | Altera | Altera |
| श्रेणी | Memory ICs | Memory ICs |
| लाइफसाइकिल स्थिति | Obsolete | NRND |
| मेमोरी प्रकार | Configuration PROM (Flash, in-system programmable) | Non-volatile configuration PROM |
| मेमोरी आकार | 1.6 Mbit | 1.6 Mbit |
| इंटरफ़ेस | Serial (4-wire Altera configuration) + JTAG (IEEE 1149.1) | — |
| Max Configuration Clock | 10 MHz | — |
| Supply Voltage (VCC) | 3.3 V (3.0 V to 3.6 V) | — |
| Programmable | In-system via JTAG | — |
| Cascade Support | Yes (multi-PROM for larger bitstreams) | Yes - daisy-chain multiple EPC2 devices via JTAG for larger bitstreams |
| पैकेज | 20-PLCC (9x9) | 20-pin PLCC (J-lead, 9x9 mm) |
| माउंटिंग प्रकार | Surface Mount | Surface Mount |
| ऑपरेटिंग तापमान | [DATA_NEEDED: full operating temperature range] | -40C to +85C (industrial) [DATA_NEEDED: exact grade from datasheet] |
| Supported FPGA Families | ACEX 1K, APEX 20K/20KC/20KE, APEX II, Arria GX, Cyclone, Cyclone II, FLEX 10K | ACEX 1K, APEX 20K/20KC/20KE, APEX II, Arria GX, Cyclone, Cyclone II, FLEX 10K, FLEX 6000, MAX 9000 |
| JTAG Support | Yes (IEEE 1149.1 boundary-scan) | — |
| RoHS स्थिति | [DATA_NEEDED: RoHS compliance status] | Non-Compliant (original Altera Pb-containing part) |
| Lead-Free | [DATA_NEEDED: lead-free status] | — |
| MSL स्तर | [DATA_NEEDED: moisture sensitivity level] | — |
| Configuration Interface | — | Serial (x1) to FPGA via DCLK/nCONFIG/nSTATUS/CONF_DONE |
| Programming Interface | — | IEEE 1149.1 (JTAG) ISP, 5.0-V and 3.3-V tolerant |
| Supply Voltage VCC | — | 3.0 V to 3.6 V (3.3-V operation) |
| ISP Voltage Range | — | 5.0 V or 3.3 V |
| Lead-Free Version | — | EPC2LC20N available as lead-free equivalent |
| Programming Support | — | Altera Programming Unit (APU), Quartus II, JTAG programmer |
| Boundary-Scan | — | IEEE 1149.1 compliant, 8-bit or 16-bit JTAG |