EPM5032DC-2 vs EPM5016DC-20 तुलना
विस्तृत दोनों ओर की तुलना EPM5032DC-2 द्वारा Altera और EPM5016DC-20 द्वारा Altera. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
विशेषता तुलना
| पैरामीटर | EPM5032DC-2 | EPM5016DC-20 |
|---|---|---|
| ब्रांड | Altera | Altera |
| श्रेणी | FPGA & CPLD | FPGA & CPLD |
| लाइफसाइकिल स्थिति | Obsolete | Obsolete |
| Product Type | CPLD (Complex Programmable Logic Device) | — |
| Series | MAX 5000 | — |
| Macrocells | 32 | 16 |
| Usable Gates (typical) | 600 | — |
| Logic Array Blocks (LABs) | 4 | — |
| पैकेज | 20-pin CDIP (Ceramic DIP) | — |
| Speed Grade | -2 (tPD ~25 ns, commercial) | -20 = 20 ns tPD |
| Configuration Memory | EPROM (one-time programmable per generation; UV-erasable variants exist) | — |
| Supply Voltage (VCC) | 5 V (single supply, +/-5%) | — |
| ऑपरेटिंग तापमान | 0C to +70C (commercial grade) | [DATA_NEEDED: operating temperature range] |
| Programmable Pins / I/O | 20 pins (JEDEC-standard 0.300" ceramic DIP) | — |
| Programming Interface | Altera ByteBlaster / parallel-port JTAG-style ISP | — |
| Interconnect | Programmable Interconnect Array (PIA) with deterministic timing | — |
| RoHS स्थिति | [DATA_NEEDED: RoHS compliance - CDIP package typically pre-RoHS] | [DATA_NEEDED: RoHS compliance] |
| माउंटिंग प्रकार | Through-Hole (DIP) | — |
| MSL स्तर | Not applicable (through-hole hermetic ceramic) | — |
| Family | — | MAX 5000 |
| Device Type | — | EPLD (UV-Erasable Programmable Logic Device) |
| Product Terms | — | 160 |
| Dedicated Inputs | — | 7 |
| I/O Pins | — | 8 |
| Propagation Delay (tPD) | — | 20 ns |
| अधिकतम क्लॉक फ़्रीक्वेंसी | — | 62.5 MHz |
| Maximum Supply Voltage | — | 5.25 V |
| Nominal Supply Voltage | — | 5.0 V |
| Process Technology | — | CMOS, UV-erasable |
| Architecture | — | PAL-type macrocell with Programmable Interconnect Array (PIA) |
| Package Type | — | 20-pin Ceramic DIP (Cerdip) with UV window |
| Package Suffix Code | — | DC = Ceramic DIP, Commercial |
| Programming Method | — | UV erase + EPROM-style programming via Altera programming hardware |