INA2126U vs INA2126P तुलना
विस्तृत दोनों ओर की तुलना INA2126U द्वारा Texas Instruments और INA2126P द्वारा Texas Instruments. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
Texas Instruments
INA2126U - 36V Dual Micropower Instrumentation Amplifier | Texas Instruments
INA2126U ✓ सक्रियTexas Instruments
INA2126P - Dual 36V Micropower Instrumentation Amplifier | Texas Instruments
INA2126P ✓ सक्रियविशेषता तुलना
| पैरामीटर | INA2126U | INA2126P |
|---|---|---|
| ब्रांड | Texas Instruments | Texas Instruments |
| श्रेणी | Amplifier ICs | Amplifier ICs |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| Amplifier Type | Dual precision instrumentation amplifier | — |
| Number of Channels | 2 channels | 2 channels |
| Maximum Total Supply Voltage | 36 V | — |
| Operating Supply Range | ±1.35 V to ±18 V | — |
| Minimum Total Supply Voltage | 2.7 V | — |
| Quiescent Current per Channel | 175 µA | — |
| Maximum Input Offset Voltage | 250 µV | — |
| Minimum Voltage Gain | 5 V/V | — |
| Maximum Voltage Gain | 10000 V/V | — |
| Typical Gain-Bandwidth Product | 200 kHz | — |
| Typical Input Noise Density at 1 kHz | 0.4 nV/√Hz | — |
| Internal Architecture | Two-op-amp instrumentation amplifier | — |
| पैकेज | 16-pin SOIC | 16-PDIP |
| माउंटिंग प्रकार | Surface mount | Through-hole |
| ऑपरेटिंग तापमान रेंज | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: Operating temperature range] |
| Input Bias Current | [DATA_NEEDED: input bias current] | [DATA_NEEDED: Input bias current] |
| Common-Mode Rejection Ratio | [DATA_NEEDED: common-mode rejection ratio] | [DATA_NEEDED: Common-mode rejection ratio] |
| Slew Rate | [DATA_NEEDED: slew rate] | — |
| RoHS स्थिति | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | [DATA_NEEDED: AEC-Q100 qualification] |
| Architecture | — | Two-op-amp instrumentation amplifier |
| Maximum Supply Voltage | — | 36 V |
| Operating Voltage Range | — | ±1.35 V to ±18 V |
| क्वाइसेंट करंट | — | 175 µA/channel |
| Offset Voltage | — | 250 µV |
| Input Type | — | Differential |
| Application | — | Low-noise differential-signal acquisition |
| Circuit Count | — | 2 circuits |
| Packaging | — | Tube |
| Product Type | — | Precision instrumentation amplifier |
| सप्लाई करंट | — | 350 µA for two channels |
| Gain Range | — | [DATA_NEEDED: Gain range] |
| Gain Bandwidth Product | — | [DATA_NEEDED: Gain bandwidth product] |