INA2126U vs INA2126P Karşılaştırma
Ayrıntılı yan yana karşılaştırma INA2126U tarafından Texas Instruments ve INA2126P tarafından Texas InstrumentsAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.
Texas Instruments
INA2126U - 36V Dual Micropower Instrumentation Amplifier | Texas Instruments
INA2126U ✓ AktifTexas Instruments
INA2126P - Dual 36V Micropower Instrumentation Amplifier | Texas Instruments
INA2126P ✓ AktifÖzellik Karşılaştırması
| Parametre | INA2126U | INA2126P |
|---|---|---|
| Marka | Texas Instruments | Texas Instruments |
| Kategori | Amplifier ICs | Amplifier ICs |
| Yaşam Döngüsü Durumu | Aktif | Aktif |
| Amplifier Type | Dual precision instrumentation amplifier | — |
| Number of Channels | 2 channels | 2 channels |
| Maximum Total Supply Voltage | 36 V | — |
| Operating Supply Range | ±1.35 V to ±18 V | — |
| Minimum Total Supply Voltage | 2.7 V | — |
| Quiescent Current per Channel | 175 µA | — |
| Maximum Input Offset Voltage | 250 µV | — |
| Minimum Voltage Gain | 5 V/V | — |
| Maximum Voltage Gain | 10000 V/V | — |
| Typical Gain-Bandwidth Product | 200 kHz | — |
| Typical Input Noise Density at 1 kHz | 0.4 nV/√Hz | — |
| Internal Architecture | Two-op-amp instrumentation amplifier | — |
| Paket | 16-pin SOIC | 16-PDIP |
| Montaj Türü | Surface mount | Through-hole |
| İşletim Sıcaklığı Aralığı | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: Operating temperature range] |
| Input Bias Current | [DATA_NEEDED: input bias current] | [DATA_NEEDED: Input bias current] |
| Common-Mode Rejection Ratio | [DATA_NEEDED: common-mode rejection ratio] | [DATA_NEEDED: Common-mode rejection ratio] |
| Slew Rate | [DATA_NEEDED: slew rate] | — |
| RoHS Durumu | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | [DATA_NEEDED: AEC-Q100 qualification] |
| Architecture | — | Two-op-amp instrumentation amplifier |
| Maximum Supply Voltage | — | 36 V |
| Operating Voltage Range | — | ±1.35 V to ±18 V |
| Durağan Akım | — | 175 µA/channel |
| Offset Voltage | — | 250 µV |
| Input Type | — | Differential |
| Application | — | Low-noise differential-signal acquisition |
| Circuit Count | — | 2 circuits |
| Packaging | — | Tube |
| Product Type | — | Precision instrumentation amplifier |
| Besleme Akımı | — | 350 µA for two channels |
| Gain Range | — | [DATA_NEEDED: Gain range] |
| Gain Bandwidth Product | — | [DATA_NEEDED: Gain bandwidth product] |