KSZ8041TL vs KSZ8041TL-S तुलना
विस्तृत दोनों ओर की तुलना KSZ8041TL द्वारा Microchip Technology और KSZ8041TL-S द्वारा Microchip Technology. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
विशेषता तुलना
| पैरामीटर | KSZ8041TL | KSZ8041TL-S |
|---|---|---|
| ब्रांड | Microchip Technology | Microchip Technology |
| श्रेणी | Interface ICs | Interface ICs |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| Product Type | 10BASE-T/100BASE-TX Ethernet physical-layer transceiver | — |
| Supported Data Rates | 10 Mb/s and 100 Mb/s | — |
| Host Interfaces | MII, RMII, and SMII | — |
| Supply Architecture | Single-supply | — |
| Cable Standard | 10BASE-T and 100BASE-TX | — |
| Mixed-Signal Design | Yes; intended to extend signaling distance while reducing power consumption | — |
| Auto MDI/MDIX | HP Auto MDI/MDIX | — |
| Interrupt Signal | INTRP on pin 32; optional PHY-register status-update signal | — |
| Number of Drivers/Receivers | 1 driver and 1 receiver | — |
| Device Type | Ethernet interface IC / physical-layer transceiver | 10/100BASE-TX Ethernet physical-layer transceiver |
| पैकेज | 48-TQFP (7 x 7 mm) | 48-TQFP, 7 mm x 7 mm |
| माउंटिंग प्रकार | Surface mount | Surface mount |
| ऑपरेटिंग तापमान | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| सप्लाई वोल्टेज | [DATA_NEEDED: supply voltage range] | — |
| Interface Clock | [DATA_NEEDED: clock frequency] | — |
| Ethernet Magnetics | [DATA_NEEDED: supported magnetics and isolation configuration] | — |
| RoHS स्थिति | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| Automotive Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Number of Drivers | — | 1 driver |
| Number of Receivers | — | 1 receiver |
| Supply Voltage Range | — | 3.135 V to 3.465 V |
| Supply Configuration | — | Single supply |
| Supported Copper Ethernet Rates | — | 10BASE-T and 100BASE-TX |
| Host Interface | — | MII, RMII, and SMII |
| Target Packaging | — | Tray |
| Signaling Design | — | Mixed-signal design |
| 100BASE-FX Support | — | Not supported in KSZ8041TL-S |
| Maximum Ethernet Data Rate | — | 100 Mbit/s |
| Minimum Ethernet Data Rate | — | 10 Mbit/s |
| AEC-Q100 Qualification | — | Not applicable |
| Automotive MDI/MDIX Support | — | [DATA_NEEDED: automotive MDI/MDIX support] |
| Media Interface | — | Copper Ethernet through external magnetics |
| Configuration Mechanism | — | Power-up PHY strapping pins |