KSZ8041TL vs KSZ8041TL-S مقایسه

مقایسه دقیق کنار به کنار KSZ8041TL توسط Microchip Technology و KSZ8041TL-S توسط Microchip Technology. مشخصات کلیدی، پارامترهای الکتریکی، بسته‌بندی، وضعیت چرخه عمر، قیمت‌گذاری و موجودی را مقایسه کنید تا بهترین قطعه را برای نیازهای طراحی خود تعیین کنید.

Microchip Technology
KSZ8041TL KSZ8041TL 10/100 Ethernet PHY | Microchip | TQFP-48

KSZ8041TL 10/100 Ethernet PHY | Microchip | TQFP-48

KSZ8041TL ✓ فعال
Microchip Technology
KSZ8041TL-S KSZ8041TL-S - 10/100 Ethernet PHY | Microchip Technology

KSZ8041TL-S - 10/100 Ethernet PHY | Microchip Technology

KSZ8041TL-S ✓ فعال

مقایسه مشخصات

پارامتر KSZ8041TL KSZ8041TL-S
برند Microchip Technology Microchip Technology
دسته‌بندی Interface ICs Interface ICs
وضعیت چرخه عمر فعال فعال
Product Type 10BASE-T/100BASE-TX Ethernet physical-layer transceiver —
Supported Data Rates 10 Mb/s and 100 Mb/s —
Host Interfaces MII, RMII, and SMII —
Supply Architecture Single-supply —
Cable Standard 10BASE-T and 100BASE-TX —
Mixed-Signal Design Yes; intended to extend signaling distance while reducing power consumption —
Auto MDI/MDIX HP Auto MDI/MDIX —
Interrupt Signal INTRP on pin 32; optional PHY-register status-update signal —
Number of Drivers/Receivers 1 driver and 1 receiver —
Device Type Ethernet interface IC / physical-layer transceiver 10/100BASE-TX Ethernet physical-layer transceiver
بسته‌بندی 48-TQFP (7 x 7 mm) 48-TQFP, 7 mm x 7 mm
نوع نصب Surface mount Surface mount
دمای کاری [DATA_NEEDED: operating temperature range] [DATA_NEEDED: operating temperature range]
ولتاژ تغذیه [DATA_NEEDED: supply voltage range] —
Interface Clock [DATA_NEEDED: clock frequency] —
Ethernet Magnetics [DATA_NEEDED: supported magnetics and isolation configuration] —
وضعیت RoHS [DATA_NEEDED: RoHS status] [DATA_NEEDED: RoHS status]
REACH Status [DATA_NEEDED: REACH status] [DATA_NEEDED: REACH status]
Automotive Qualification [DATA_NEEDED: AEC-Q100 qualification] —
Number of Drivers — 1 driver
Number of Receivers — 1 receiver
Supply Voltage Range — 3.135 V to 3.465 V
Supply Configuration — Single supply
Supported Copper Ethernet Rates — 10BASE-T and 100BASE-TX
Host Interface — MII, RMII, and SMII
Target Packaging — Tray
Signaling Design — Mixed-signal design
100BASE-FX Support — Not supported in KSZ8041TL-S
Maximum Ethernet Data Rate — 100 Mbit/s
Minimum Ethernet Data Rate — 10 Mbit/s
AEC-Q100 Qualification — Not applicable
Automotive MDI/MDIX Support — [DATA_NEEDED: automotive MDI/MDIX support]
Media Interface — Copper Ethernet through external magnetics
Configuration Mechanism — Power-up PHY strapping pins

دیتاشیت‌ها و منابع

مرور همه محصولات ایجاد BOM درخواست استعلام قیمت