KSZ8041TL vs KSZ8041TL-S 비교

다음의 상세 나란히 비교: KSZ8041TL 제조: Microchip Technology 및 KSZ8041TL-S 제조: Microchip Technology. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.

Microchip Technology
KSZ8041TL KSZ8041TL 10/100 Ethernet PHY | Microchip | TQFP-48

KSZ8041TL 10/100 Ethernet PHY | Microchip | TQFP-48

KSZ8041TL ✓ 활성
Microchip Technology
KSZ8041TL-S KSZ8041TL-S - 10/100 Ethernet PHY | Microchip Technology

KSZ8041TL-S - 10/100 Ethernet PHY | Microchip Technology

KSZ8041TL-S ✓ 활성

사양 비교

파라미터 KSZ8041TL KSZ8041TL-S
브랜드 Microchip Technology Microchip Technology
카테고리 Interface ICs Interface ICs
수명 주기 상태 활성 활성
Product Type 10BASE-T/100BASE-TX Ethernet physical-layer transceiver —
Supported Data Rates 10 Mb/s and 100 Mb/s —
Host Interfaces MII, RMII, and SMII —
Supply Architecture Single-supply —
Cable Standard 10BASE-T and 100BASE-TX —
Mixed-Signal Design Yes; intended to extend signaling distance while reducing power consumption —
Auto MDI/MDIX HP Auto MDI/MDIX —
Interrupt Signal INTRP on pin 32; optional PHY-register status-update signal —
Number of Drivers/Receivers 1 driver and 1 receiver —
Device Type Ethernet interface IC / physical-layer transceiver 10/100BASE-TX Ethernet physical-layer transceiver
패키지 48-TQFP (7 x 7 mm) 48-TQFP, 7 mm x 7 mm
실장 유형 Surface mount Surface mount
동작 온도 [DATA_NEEDED: operating temperature range] [DATA_NEEDED: operating temperature range]
공급 전압 [DATA_NEEDED: supply voltage range] —
Interface Clock [DATA_NEEDED: clock frequency] —
Ethernet Magnetics [DATA_NEEDED: supported magnetics and isolation configuration] —
RoHS 상태 [DATA_NEEDED: RoHS status] [DATA_NEEDED: RoHS status]
REACH Status [DATA_NEEDED: REACH status] [DATA_NEEDED: REACH status]
Automotive Qualification [DATA_NEEDED: AEC-Q100 qualification] —
Number of Drivers — 1 driver
Number of Receivers — 1 receiver
Supply Voltage Range — 3.135 V to 3.465 V
Supply Configuration — Single supply
Supported Copper Ethernet Rates — 10BASE-T and 100BASE-TX
Host Interface — MII, RMII, and SMII
Target Packaging — Tray
Signaling Design — Mixed-signal design
100BASE-FX Support — Not supported in KSZ8041TL-S
Maximum Ethernet Data Rate — 100 Mbit/s
Minimum Ethernet Data Rate — 10 Mbit/s
AEC-Q100 Qualification — Not applicable
Automotive MDI/MDIX Support — [DATA_NEEDED: automotive MDI/MDIX support]
Media Interface — Copper Ethernet through external magnetics
Configuration Mechanism — Power-up PHY strapping pins

데이터시트 & 자료

모든 제품 보기 BOM 생성 견적 요청