KSZ8041TL vs KSZ8041TL-S So sánh

So sánh chi tiết song song của KSZ8041TL bằng Microchip Technology và KSZ8041TL-S bằng Microchip Technology. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.

Microchip Technology
KSZ8041TL KSZ8041TL 10/100 Ethernet PHY | Microchip | TQFP-48

KSZ8041TL 10/100 Ethernet PHY | Microchip | TQFP-48

KSZ8041TL ✓ Hoạt động
Microchip Technology
KSZ8041TL-S KSZ8041TL-S - 10/100 Ethernet PHY | Microchip Technology

KSZ8041TL-S - 10/100 Ethernet PHY | Microchip Technology

KSZ8041TL-S ✓ Hoạt động

So sánh thông số kỹ thuật

Tham số KSZ8041TL KSZ8041TL-S
Thương hiệu Microchip Technology Microchip Technology
Danh mục Interface ICs Interface ICs
Trạng thái vòng đời Hoạt động Hoạt động
Product Type 10BASE-T/100BASE-TX Ethernet physical-layer transceiver —
Supported Data Rates 10 Mb/s and 100 Mb/s —
Host Interfaces MII, RMII, and SMII —
Supply Architecture Single-supply —
Cable Standard 10BASE-T and 100BASE-TX —
Mixed-Signal Design Yes; intended to extend signaling distance while reducing power consumption —
Auto MDI/MDIX HP Auto MDI/MDIX —
Interrupt Signal INTRP on pin 32; optional PHY-register status-update signal —
Number of Drivers/Receivers 1 driver and 1 receiver —
Device Type Ethernet interface IC / physical-layer transceiver 10/100BASE-TX Ethernet physical-layer transceiver
Hộp 48-TQFP (7 x 7 mm) 48-TQFP, 7 mm x 7 mm
Kiểu lắp đặt Surface mount Surface mount
Nhiệt độ hoạt động [DATA_NEEDED: operating temperature range] [DATA_NEEDED: operating temperature range]
Điện áp cung cấp [DATA_NEEDED: supply voltage range] —
Interface Clock [DATA_NEEDED: clock frequency] —
Ethernet Magnetics [DATA_NEEDED: supported magnetics and isolation configuration] —
Trạng thái RoHS [DATA_NEEDED: RoHS status] [DATA_NEEDED: RoHS status]
REACH Status [DATA_NEEDED: REACH status] [DATA_NEEDED: REACH status]
Automotive Qualification [DATA_NEEDED: AEC-Q100 qualification] —
Number of Drivers — 1 driver
Number of Receivers — 1 receiver
Supply Voltage Range — 3.135 V to 3.465 V
Supply Configuration — Single supply
Supported Copper Ethernet Rates — 10BASE-T and 100BASE-TX
Host Interface — MII, RMII, and SMII
Target Packaging — Tray
Signaling Design — Mixed-signal design
100BASE-FX Support — Not supported in KSZ8041TL-S
Maximum Ethernet Data Rate — 100 Mbit/s
Minimum Ethernet Data Rate — 10 Mbit/s
AEC-Q100 Qualification — Not applicable
Automotive MDI/MDIX Support — [DATA_NEEDED: automotive MDI/MDIX support]
Media Interface — Copper Ethernet through external magnetics
Configuration Mechanism — Power-up PHY strapping pins

Hồ sơ kỹ thuật & Tài nguyên

Xem tất cả sản phẩm Tạo BOM Yêu cầu báo giá