LT1030CD vs MAX202CD तुलना
विस्तृत दोनों ओर की तुलना LT1030CD द्वारा Texas Instruments और MAX202CD द्वारा Texas Instruments. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
विशेषता तुलना
| पैरामीटर | LT1030CD | MAX202CD |
|---|---|---|
| ब्रांड | Texas Instruments | Texas Instruments |
| श्रेणी | Interface ICs | Interface ICs |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| फ़ंक्शन | Line Driver | — |
| Number of Drivers/Receivers | 4 / 0 | — |
| Protocol | EIA/TIA-232-F (RS-232) | — |
| Supply Voltage Range | ±5 V to ±15 V | 4.5 V to 5.5 V |
| Typical Supply Current | 500 µA | — |
| Shutdown Supply Current | 0 µA | — |
| Output Drive Current | 10 mA | — |
| Externally Applied Output Voltage Tolerance | ±30 V | — |
| Output Swing (positive rail) | Within 200 mV of V+ | — |
| Output Swing (negative rail) | Within 1 V of V- | — |
| ऑपरेटिंग तापमान रेंज | 0 °C to 70 °C | — |
| पैकेज | 14-SOIC (D) | 16-pin SOIC |
| पिन की संख्या | 14 | — |
| माउंटिंग प्रकार | Surface Mount | Surface mount |
| Lead Finish | NiPdAu | — |
| आउटपुट प्रकार | 3-State (open when off) | — |
| RoHS स्थिति | Compliant | [DATA_NEEDED: RoHS status] |
| Product Type | — | Dual RS-232 line driver and receiver |
| Number of Drivers | — | 2 |
| Number of Receivers | — | 2 |
| ESD Protection | — | ±15 kV pin-to-pin on serial-port connection pins, including ground |
| RS-232 Standard | — | TIA/EIA-232-F |
| Interface Function | — | Electrical interface between asynchronous communication controller and serial-port connector |
| Charge-Pump Circuit | — | Dual charge-pump circuit |
| Channel Configuration | — | 2 drivers and 2 receivers |
| ऑपरेटिंग तापमान | — | [DATA_NEEDED: operating temperature range] |
| क्वाइसेंट करंट | — | [DATA_NEEDED: quiescent current] |
| डेटा दर | — | [DATA_NEEDED: maximum data rate] |
| Driver Output Voltage | — | [DATA_NEEDED: RS-232 driver output voltage] |
| Receiver Input Threshold | — | [DATA_NEEDED: receiver input threshold] |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |