LT1030CD vs MAX202CD Pengandingan
Pengandingan Sisi Kiri Sisi Kanan Terperinci LT1030CD disebabkan oleh Texas Instruments dan MAX202CD disebabkan oleh Texas Instruments. Bandingkan spesifikasi utama, parameter elektrik, pakej, status kehidupan, harga, dan keupayaan untuk menentukan komponen terbaik untuk keperluan disenjaya anda.
Pengandingan Spesifikasi
| Parametr | LT1030CD | MAX202CD |
|---|---|---|
| Merek | Texas Instruments | Texas Instruments |
| Kategori | Interface ICs | Interface ICs |
| Status Lingkungan Hidup | Aktif | Aktif |
| Fungsi | Line Driver | — |
| Number of Drivers/Receivers | 4 / 0 | — |
| Protocol | EIA/TIA-232-F (RS-232) | — |
| Supply Voltage Range | ±5 V to ±15 V | 4.5 V to 5.5 V |
| Typical Supply Current | 500 µA | — |
| Shutdown Supply Current | 0 µA | — |
| Output Drive Current | 10 mA | — |
| Externally Applied Output Voltage Tolerance | ±30 V | — |
| Output Swing (positive rail) | Within 200 mV of V+ | — |
| Output Swing (negative rail) | Within 1 V of V- | — |
| Gambaran Suhu Operasi | 0 °C to 70 °C | — |
| Kemasan | 14-SOIC (D) | 16-pin SOIC |
| Bilangan Pin | 14 | — |
| Jenis Pemasangan | Surface Mount | Surface mount |
| Lead Finish | NiPdAu | — |
| Jenis Output | 3-State (open when off) | — |
| Status RoHS | Compliant | [DATA_NEEDED: RoHS status] |
| Product Type | — | Dual RS-232 line driver and receiver |
| Number of Drivers | — | 2 |
| Number of Receivers | — | 2 |
| ESD Protection | — | ±15 kV pin-to-pin on serial-port connection pins, including ground |
| RS-232 Standard | — | TIA/EIA-232-F |
| Interface Function | — | Electrical interface between asynchronous communication controller and serial-port connector |
| Charge-Pump Circuit | — | Dual charge-pump circuit |
| Channel Configuration | — | 2 drivers and 2 receivers |
| Suhu Operasi | — | [DATA_NEEDED: operating temperature range] |
| Arus Dalam Tentera | — | [DATA_NEEDED: quiescent current] |
| Kadar Data | — | [DATA_NEEDED: maximum data rate] |
| Driver Output Voltage | — | [DATA_NEEDED: RS-232 driver output voltage] |
| Receiver Input Threshold | — | [DATA_NEEDED: receiver input threshold] |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |