LT1030CD vs MAX202CD Karşılaştırma
Ayrıntılı yan yana karşılaştırma LT1030CD tarafından Texas Instruments ve MAX202CD tarafından Texas InstrumentsAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.
Özellik Karşılaştırması
| Parametre | LT1030CD | MAX202CD |
|---|---|---|
| Marka | Texas Instruments | Texas Instruments |
| Kategori | Interface ICs | Interface ICs |
| Yaşam Döngüsü Durumu | Aktif | Aktif |
| Fonksiyon | Line Driver | — |
| Number of Drivers/Receivers | 4 / 0 | — |
| Protocol | EIA/TIA-232-F (RS-232) | — |
| Supply Voltage Range | ±5 V to ±15 V | 4.5 V to 5.5 V |
| Typical Supply Current | 500 µA | — |
| Shutdown Supply Current | 0 µA | — |
| Output Drive Current | 10 mA | — |
| Externally Applied Output Voltage Tolerance | ±30 V | — |
| Output Swing (positive rail) | Within 200 mV of V+ | — |
| Output Swing (negative rail) | Within 1 V of V- | — |
| İşletim Sıcaklığı Aralığı | 0 °C to 70 °C | — |
| Paket | 14-SOIC (D) | 16-pin SOIC |
| Pin Sayısı | 14 | — |
| Montaj Türü | Surface Mount | Surface mount |
| Lead Finish | NiPdAu | — |
| Çıkış Türü | 3-State (open when off) | — |
| RoHS Durumu | Compliant | [DATA_NEEDED: RoHS status] |
| Product Type | — | Dual RS-232 line driver and receiver |
| Number of Drivers | — | 2 |
| Number of Receivers | — | 2 |
| ESD Protection | — | ±15 kV pin-to-pin on serial-port connection pins, including ground |
| RS-232 Standard | — | TIA/EIA-232-F |
| Interface Function | — | Electrical interface between asynchronous communication controller and serial-port connector |
| Charge-Pump Circuit | — | Dual charge-pump circuit |
| Channel Configuration | — | 2 drivers and 2 receivers |
| İşletim Sıcaklığı | — | [DATA_NEEDED: operating temperature range] |
| Durağan Akım | — | [DATA_NEEDED: quiescent current] |
| Veri Hızı | — | [DATA_NEEDED: maximum data rate] |
| Driver Output Voltage | — | [DATA_NEEDED: RS-232 driver output voltage] |
| Receiver Input Threshold | — | [DATA_NEEDED: receiver input threshold] |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |