LT1030CD vs MAX202CD Perbandingan
Perbandingan bersamaan detil LT1030CD dari Texas Instruments dan MAX202CD dari Texas Instruments. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Perbandingan Spesifikasi
| Parameter Umum | LT1030CD | MAX202CD |
|---|---|---|
| Merek | Texas Instruments | Texas Instruments |
| Kategori | Interface ICs | Interface ICs |
| Status Lingkungan Hidup | Aktif | Aktif |
| Fungsi | Line Driver | — |
| Number of Drivers/Receivers | 4 / 0 | — |
| Protocol | EIA/TIA-232-F (RS-232) | — |
| Supply Voltage Range | ±5 V to ±15 V | 4.5 V to 5.5 V |
| Typical Supply Current | 500 µA | — |
| Shutdown Supply Current | 0 µA | — |
| Output Drive Current | 10 mA | — |
| Externally Applied Output Voltage Tolerance | ±30 V | — |
| Output Swing (positive rail) | Within 200 mV of V+ | — |
| Output Swing (negative rail) | Within 1 V of V- | — |
| Rentang Suhu Kerja | 0 °C to 70 °C | — |
| Paket | 14-SOIC (D) | 16-pin SOIC |
| Jumlah Pin | 14 | — |
| Tipe Mounting | Surface Mount | Surface mount |
| Lead Finish | NiPdAu | — |
| Tipe Output | 3-State (open when off) | — |
| Status RoHS | Compliant | [DATA_NEEDED: RoHS status] |
| Product Type | — | Dual RS-232 line driver and receiver |
| Number of Drivers | — | 2 |
| Number of Receivers | — | 2 |
| ESD Protection | — | ±15 kV pin-to-pin on serial-port connection pins, including ground |
| RS-232 Standard | — | TIA/EIA-232-F |
| Interface Function | — | Electrical interface between asynchronous communication controller and serial-port connector |
| Charge-Pump Circuit | — | Dual charge-pump circuit |
| Channel Configuration | — | 2 drivers and 2 receivers |
| Suhu Kerja | — | [DATA_NEEDED: operating temperature range] |
| Arus Memerintah | — | [DATA_NEEDED: quiescent current] |
| Laju Data | — | [DATA_NEEDED: maximum data rate] |
| Driver Output Voltage | — | [DATA_NEEDED: RS-232 driver output voltage] |
| Receiver Input Threshold | — | [DATA_NEEDED: receiver input threshold] |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |