LTC2309IF vs LTC2313HTS8-14 तुलना
विस्तृत दोनों ओर की तुलना LTC2309IF द्वारा Analog Devices और LTC2313HTS8-14 द्वारा Analog Devices. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
Analog Devices
LTC2313HTS8-14 - 14-bit 2.5Msps SAR ADC in TSOT-23-8 | Analog Devices
LTC2313HTS8-14 ✓ सक्रियविशेषता तुलना
| पैरामीटर | LTC2309IF | LTC2313HTS8-14 |
|---|---|---|
| ब्रांड | Analog Devices | Analog Devices |
| श्रेणी | ADC/DAC | ADC/DAC |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| रेज़ोल्यूशन | 12 bit | 14 bits |
| Number of Input Channels | 8 single-ended / 4 differential | 1 (single-ended/differential) |
| Architecture | SAR (Successive Approximation Register) | SAR (Successive Approximation Register) |
| Conversion Time | 1.3 us per channel (typical) | — |
| Throughput Rate | up to 500 ksps (datasheet-dependent) | — |
| Supply Voltage (VDD) | 5 V single supply | — |
| सप्लाई करंट | 300 uA at 1 ksps (typical) | 5 mA at 2.5 Msps |
| Digital Interface | I2C-compatible, standard / fast / high-speed modes | — |
| I2C Address Selection | 2 pins (AD0, AD1) - up to 4 devices on one bus | — |
| Internal Reference | 2.5 V, 10 ppm/C typical drift | 2.5 V nominal, 20 ppm/°C max drift |
| External Reference Input (REFIN) | Yes, supports ratiometric operation | — |
| Sample-and-Hold | Fully differential, common-mode noise rejection | — |
| Analog Input Range | 0 V to VDD (unipolar); +/-VREF differential | — |
| पैकेज | 20-TSSOP (FE) | TSOT-23-8 (HTS8) |
| Operating Temperature Range (I grade) | -40 C to +85 C | — |
| शटडाउन करंट | Nap / I2C power-down supported | — |
| RoHS स्थिति | Compliant (PBF suffix) | Compliant |
| Sample Rate | — | 2.5 Msps |
| सप्लाई वोल्टेज | — | 3 V to 5 V (single supply, 5 V typical) |
| Input Type | — | Pseudo-differential (IN+, IN-) |
| Serial Interface | — | SPI-compatible SCK/SDO/SDI/CSF, supports 1.8 V/2.5 V/3 V/5 V logic |
| No-Missing-Codes Performance | — | 14 bits guaranteed |
| Latency | — | 0 conversion latency |
| ऑपरेटिंग तापमान रेंज | — | -40 °C to +125 °C (H-grade) |
| माउंटिंग प्रकार | — | Surface Mount |
| MSL स्तर | — | 1 (per JEDEC J-STD-020) |
| Conversion Cycles | — | 16 SCK per conversion (14-bit plus 2 dummy bits) |