MAX3095CSE+ vs MAX3095CEE+ तुलना

विस्तृत दोनों ओर की तुलना MAX3095CSE+ द्वारा Analog Devices और MAX3095CEE+ द्वारा Analog Devices. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。

Analog Devices
MAX3095CSE+ MAX3095CSE+ - 10Mbps Quad RS-422/RS-485 Receiver | Analog Devices

MAX3095CSE+ - 10Mbps Quad RS-422/RS-485 Receiver | Analog Devices

MAX3095CSE+ ✓ सक्रिय
Analog Devices
MAX3095CEE+ MAX3095CEE+ - ±15kV ESD, 10Mbps Quad RS-422/RS-485 Receiver | Analog Devices

MAX3095CEE+ - ±15kV ESD, 10Mbps Quad RS-422/RS-485 Receiver | Analog Devices

MAX3095CEE+ ✓ सक्रिय

विशेषता तुलना

पैरामीटर MAX3095CSE+ MAX3095CEE+
ब्रांड Analog Devices Analog Devices
श्रेणी Interface ICs Interface ICs
लाइफसाइकिल स्थिति सक्रिय सक्रिय
Receiver Channels 4 channels —
Supported Standards RS-422 and RS-485 receiver operation —
Maximum Data Rate 10 Mbps —
सप्लाई वोल्टेज +5 V 4.75 V to 5.25 V (5 V nominal)
Input ESD Protection, Human Body Model ±15 kV —
Input ESD Protection, Air-Gap Discharge ±15 kV —
Input ESD Protection, Contact Discharge ±8 kV —
पैकेज 16-SOIC 16-pin QSOP
माउंटिंग प्रकार Surface mount Surface Mount
Product Type Quad differential line receiver —
ESD Protection Location All receiver inputs —
Application Category RS-422/RS-485/RS-423 bus receiver —
Level Translation Receiver interface application —
Telecommunications Suitability Telecommunications equipment application listed by manufacturer —
ऑपरेटिंग तापमान रेंज [DATA_NEEDED: operating temperature range] —
Input Common-Mode Voltage Range [DATA_NEEDED: input common-mode voltage range] —
Output Logic Levels [DATA_NEEDED: output logic voltage levels] —
Propagation Delay [DATA_NEEDED: propagation delay] —
सप्लाई करंट [DATA_NEEDED: supply current] 13 mA typical (all channels active)
RoHS स्थिति [DATA_NEEDED: RoHS status] Compliant
REACH Status [DATA_NEEDED: REACH status] —
AEC-Q100 Qualification [DATA_NEEDED: AEC-Q100 qualification] —
फ़ंक्शन — Receiver (0/4 driver/receiver)
Protocol — RS-422, RS-485
Number of Receivers — 4
डेटा दर — 10 Mbps (minimum)
ESD Protection (Receiver Inputs) — ±15 kV HBM
Common-Mode Input Range — -7 V to +12 V
Differential Input Threshold — ±200 mV typical
Input Hysteresis — 25 mV typical
Fail-Safe Bias — Yes (internal, forces logic-high on open/short inputs)
ऑपरेटिंग तापमान — 0 °C to +70 °C (commercial C-grade)
MSL स्तर — 1 (unlimited)
Lead-Free — Yes

डेटाशीट और संसाधन

सभी उत्पादों को देखें BOM बनाएं कीट की अनुरोध