MAX3095CSE+ vs MAX3095CEE+ Comparação
Comparação detalhada lado a lado de MAX3095CSE+ por Analog Devices e MAX3095CEE+ por Analog Devices. Compare especificações principais, parâmetros elétricos, encapsulamento, status do ciclo de vida, preços e disponibilidade para determinar o melhor componente para os requisitos do seu projeto.
Analog Devices
MAX3095CSE+ - 10Mbps Quad RS-422/RS-485 Receiver | Analog Devices
MAX3095CSE+ ✓ AtivoAnalog Devices
MAX3095CEE+ - ±15kV ESD, 10Mbps Quad RS-422/RS-485 Receiver | Analog Devices
MAX3095CEE+ ✓ AtivoComparação de especificações
| Parâmetro | MAX3095CSE+ | MAX3095CEE+ |
|---|---|---|
| Marca | Analog Devices | Analog Devices |
| Categoria | Interface ICs | Interface ICs |
| Status do ciclo de vida | Ativo | Ativo |
| Receiver Channels | 4 channels | — |
| Supported Standards | RS-422 and RS-485 receiver operation | — |
| Maximum Data Rate | 10 Mbps | — |
| Tensão de alimentação | +5 V | 4.75 V to 5.25 V (5 V nominal) |
| Input ESD Protection, Human Body Model | ±15 kV | — |
| Input ESD Protection, Air-Gap Discharge | ±15 kV | — |
| Input ESD Protection, Contact Discharge | ±8 kV | — |
| Encapsulamento | 16-SOIC | 16-pin QSOP |
| Tipo de montagem | Surface mount | Surface Mount |
| Product Type | Quad differential line receiver | — |
| ESD Protection Location | All receiver inputs | — |
| Application Category | RS-422/RS-485/RS-423 bus receiver | — |
| Level Translation | Receiver interface application | — |
| Telecommunications Suitability | Telecommunications equipment application listed by manufacturer | — |
| Faixa de temperatura de operação | [DATA_NEEDED: operating temperature range] | — |
| Input Common-Mode Voltage Range | [DATA_NEEDED: input common-mode voltage range] | — |
| Output Logic Levels | [DATA_NEEDED: output logic voltage levels] | — |
| Propagation Delay | [DATA_NEEDED: propagation delay] | — |
| Corrente de alimentação | [DATA_NEEDED: supply current] | 13 mA typical (all channels active) |
| Status RoHS | [DATA_NEEDED: RoHS status] | Compliant |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Função | — | Receiver (0/4 driver/receiver) |
| Protocol | — | RS-422, RS-485 |
| Number of Receivers | — | 4 |
| Taxa de dados | — | 10 Mbps (minimum) |
| ESD Protection (Receiver Inputs) | — | ±15 kV HBM |
| Common-Mode Input Range | — | -7 V to +12 V |
| Differential Input Threshold | — | ±200 mV typical |
| Input Hysteresis | — | 25 mV typical |
| Fail-Safe Bias | — | Yes (internal, forces logic-high on open/short inputs) |
| Temperatura de operação | — | 0 °C to +70 °C (commercial C-grade) |
| Nível MSL | — | 1 (unlimited) |
| Lead-Free | — | Yes |