MAX3095CSE+ vs MAX3095CEE+ 비교

다음의 상세 나란히 비교: MAX3095CSE+ 제조: Analog Devices 및 MAX3095CEE+ 제조: Analog Devices. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.

사양 비교

파라미터 MAX3095CSE+ MAX3095CEE+
브랜드 Analog Devices Analog Devices
카테고리 Interface ICs Interface ICs
수명 주기 상태 활성 활성
Receiver Channels 4 channels —
Supported Standards RS-422 and RS-485 receiver operation —
Maximum Data Rate 10 Mbps —
공급 전압 +5 V 4.75 V to 5.25 V (5 V nominal)
Input ESD Protection, Human Body Model ±15 kV —
Input ESD Protection, Air-Gap Discharge ±15 kV —
Input ESD Protection, Contact Discharge ±8 kV —
패키지 16-SOIC 16-pin QSOP
실장 유형 Surface mount Surface Mount
Product Type Quad differential line receiver —
ESD Protection Location All receiver inputs —
Application Category RS-422/RS-485/RS-423 bus receiver —
Level Translation Receiver interface application —
Telecommunications Suitability Telecommunications equipment application listed by manufacturer —
동작 온도 범위 [DATA_NEEDED: operating temperature range] —
Input Common-Mode Voltage Range [DATA_NEEDED: input common-mode voltage range] —
Output Logic Levels [DATA_NEEDED: output logic voltage levels] —
Propagation Delay [DATA_NEEDED: propagation delay] —
공급 전류 [DATA_NEEDED: supply current] 13 mA typical (all channels active)
RoHS 상태 [DATA_NEEDED: RoHS status] Compliant
REACH Status [DATA_NEEDED: REACH status] —
AEC-Q100 Qualification [DATA_NEEDED: AEC-Q100 qualification] —
기능 — Receiver (0/4 driver/receiver)
Protocol — RS-422, RS-485
Number of Receivers — 4
데이터 속도 — 10 Mbps (minimum)
ESD Protection (Receiver Inputs) — ±15 kV HBM
Common-Mode Input Range — -7 V to +12 V
Differential Input Threshold — ±200 mV typical
Input Hysteresis — 25 mV typical
Fail-Safe Bias — Yes (internal, forces logic-high on open/short inputs)
동작 온도 — 0 °C to +70 °C (commercial C-grade)
MSL 레벨 — 1 (unlimited)
Lead-Free — Yes

데이터시트 & 자료

모든 제품 보기 BOM 생성 견적 요청