MAX3095CSE+ vs MAX3095CEE+ 比較

詳細な並列比較: MAX3095CSE+ メーカー: Analog Devices および MAX3095CEE+ メーカー: Analog Devices。主要仕様、電気的特性、パッケージ、ライフサイクルステータス、価格、在庫状況を比較して、設計要件に最適な部品を判断してください。

仕様比較

パラメータ MAX3095CSE+ MAX3095CEE+
ブランド Analog Devices Analog Devices
カテゴリ Interface ICs Interface ICs
ライフサイクル状態 有効 有効
Receiver Channels 4 channels —
Supported Standards RS-422 and RS-485 receiver operation —
Maximum Data Rate 10 Mbps —
電源電圧 +5 V 4.75 V to 5.25 V (5 V nominal)
Input ESD Protection, Human Body Model ±15 kV —
Input ESD Protection, Air-Gap Discharge ±15 kV —
Input ESD Protection, Contact Discharge ±8 kV —
パッケージ 16-SOIC 16-pin QSOP
実装タイプ Surface mount Surface Mount
Product Type Quad differential line receiver —
ESD Protection Location All receiver inputs —
Application Category RS-422/RS-485/RS-423 bus receiver —
Level Translation Receiver interface application —
Telecommunications Suitability Telecommunications equipment application listed by manufacturer —
動作温度範囲 [DATA_NEEDED: operating temperature range] —
Input Common-Mode Voltage Range [DATA_NEEDED: input common-mode voltage range] —
Output Logic Levels [DATA_NEEDED: output logic voltage levels] —
Propagation Delay [DATA_NEEDED: propagation delay] —
電源電流 [DATA_NEEDED: supply current] 13 mA typical (all channels active)
RoHS ステータス [DATA_NEEDED: RoHS status] Compliant
REACH Status [DATA_NEEDED: REACH status] —
AEC-Q100 Qualification [DATA_NEEDED: AEC-Q100 qualification] —
機能 — Receiver (0/4 driver/receiver)
Protocol — RS-422, RS-485
Number of Receivers — 4
データレート — 10 Mbps (minimum)
ESD Protection (Receiver Inputs) — ±15 kV HBM
Common-Mode Input Range — -7 V to +12 V
Differential Input Threshold — ±200 mV typical
Input Hysteresis — 25 mV typical
Fail-Safe Bias — Yes (internal, forces logic-high on open/short inputs)
動作温度 — 0 °C to +70 °C (commercial C-grade)
MSLレベル — 1 (unlimited)
Lead-Free — Yes

データシート&リソース

すべての製品を閲覧 BOMを作成 見積もり依頼