MMA6260QR2 vs MMA6233QR2 तुलना
विस्तृत दोनों ओर की तुलना MMA6260QR2 द्वारा NXP Semiconductors और MMA6233QR2 द्वारा NXP Semiconductors. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
NXP Semiconductors
MMA6233QR2 - ±10g Dual-Axis Micromachined Accelerometer | NXP
MMA6233QR2 Obsoleteविशेषता तुलना
| पैरामीटर | MMA6260QR2 | MMA6233QR2 |
|---|---|---|
| ब्रांड | NXP Semiconductors | NXP Semiconductors |
| श्रेणी | Motion Sensors | Motion Sensors |
| लाइफसाइकिल स्थिति | Obsolete | Obsolete |
| Type | Accelerometer, Dual Axis (X, Y) | — |
| Acceleration Range | ±1.5 g | — |
| Axis | X, Y (dual) | — |
| Sensitivity | [DATA_NEEDED: sensitivity V/g] | 120 mV/g (typical at 3.3V Vdd, [DATA_NEEDED: sensitivity tolerance]) |
| Bandwidth | 50 Hz (1-pole low-pass, factory set) | 900 Hz (maximum) |
| आउटपुट प्रकार | Analog, ratiometric | Analog, ratiometric |
| सप्लाई वोल्टेज | [DATA_NEEDED: Vdd range] | — |
| सप्लाई करंट | [DATA_NEEDED: Idd] | 2.5 mA (typical, [DATA_NEEDED: max]) |
| Self-Test | Yes (logic-high on ST pin) | Yes (active-high logic input) |
| g-Select Pins | Yes (4 sensitivity options) | — |
| ऑपरेटिंग तापमान | -40 °C to +85 °C | -20C to +85C |
| पैकेज | 16-QFN-EP (6x6 mm) | 16-pin QFN-EP (6x6 mm) |
| माउंटिंग प्रकार | Surface Mount | Surface Mount |
| RoHS स्थिति | RoHS Compliant (per Digchip) | Compliant |
| Lead Status | Contains Lead (per Digchip, prior to conversion) | — |
| सेंसर प्रकार | — | Accelerometer, Dual-Axis (X, Y) |
| Full-Scale Range | — | ±10g (±6g via g-select) |
| Output Voltage at 0g | — | VDD/2 |
| Supply Voltage (VDD) | — | 3.0 V to 5.25 V |
| नॉइज़ डेंसिटी | — | [DATA_NEEDED: noise density] |
| Nonlinearity | — | [DATA_NEEDED: nonlinearity %FS] |
| g-Select Input | — | Yes (±10g or ±6g selection) |
| Filter Type | — | 1-pole low-pass (factory-set cut-off) |
| Lead-Free Status | — | Contains Lead (NXP datasheet note) |
| MSL स्तर | — | [DATA_NEEDED: MSL rating] |