MMA6260QR2 vs MMA6233QR2 Ikinahambing
Detalyadong pagkakahiwalay na pagkakahambing ng MMA6260QR2 sa pamamagitan ng NXP Semiconductors at MMA6233QR2 sa pamamagitan ng NXP Semiconductors. Ikinahambing ang mga pangunahing paglalarawan, mga tama ng elektriko, paakay, kalagayan ng buhay, presyo, at pagkakaroon upang makita ang pinakamahusay na komponente para sa iyong mga kinakailangang pang disenyo.
NXP Semiconductors
MMA6233QR2 - ±10g Dual-Axis Micromachined Accelerometer | NXP
MMA6233QR2 ObsoletePagsanggunian na paghahambing
| Parametro | MMA6260QR2 | MMA6233QR2 |
|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors |
| Kategorya | Motion Sensors | Motion Sensors |
| Katayuan ng Lifecycle | Obsolete | Obsolete |
| Type | Accelerometer, Dual Axis (X, Y) | — |
| Acceleration Range | ±1.5 g | — |
| Axis | X, Y (dual) | — |
| Sensitivity | [DATA_NEEDED: sensitivity V/g] | 120 mV/g (typical at 3.3V Vdd, [DATA_NEEDED: sensitivity tolerance]) |
| Bandwidth | 50 Hz (1-pole low-pass, factory set) | 900 Hz (maximum) |
| Type ng Output | Analog, ratiometric | Analog, ratiometric |
| Volte ng Pagbibigay | [DATA_NEEDED: Vdd range] | — |
| Kuru-kuryente ng Pagbibigay | [DATA_NEEDED: Idd] | 2.5 mA (typical, [DATA_NEEDED: max]) |
| Self-Test | Yes (logic-high on ST pin) | Yes (active-high logic input) |
| g-Select Pins | Yes (4 sensitivity options) | — |
| Temperature na Operasyon | -40 °C to +85 °C | -20C to +85C |
| Packhaging | 16-QFN-EP (6x6 mm) | 16-pin QFN-EP (6x6 mm) |
| Uri ng Pagpapasok | Surface Mount | Surface Mount |
| Tindminan RoHS | RoHS Compliant (per Digchip) | Compliant |
| Lead Status | Contains Lead (per Digchip, prior to conversion) | — |
| Type ng Sensor | — | Accelerometer, Dual-Axis (X, Y) |
| Full-Scale Range | — | ±10g (±6g via g-select) |
| Output Voltage at 0g | — | VDD/2 |
| Supply Voltage (VDD) | — | 3.0 V to 5.25 V |
| Density ng Noise | — | [DATA_NEEDED: noise density] |
| Nonlinearity | — | [DATA_NEEDED: nonlinearity %FS] |
| g-Select Input | — | Yes (±10g or ±6g selection) |
| Filter Type | — | 1-pole low-pass (factory-set cut-off) |
| Lead-Free Status | — | Contains Lead (NXP datasheet note) |
| Level ng MSL | — | [DATA_NEEDED: MSL rating] |