MPX4100A vs MPX2100D तुलना
विस्तृत दोनों ओर की तुलना MPX4100A द्वारा NXP Semiconductors और MPX2100D द्वारा NXP Semiconductors. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
विशेषता तुलना
| पैरामीटर | MPX4100A | MPX2100D |
|---|---|---|
| ब्रांड | NXP Semiconductors | NXP Semiconductors |
| श्रेणी | Pressure Sensors | Pressure Sensors |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| Pressure Type | Absolute | Differential |
| Operating Pressure Range | 20 kPa to 105 kPa (2.9 PSI to 15.23 PSI) | 0 kPa to 100 kPa (0 to 14.5 psi) |
| आउटपुट प्रकार | Analog Voltage | Analog ratiometric Wheatstone bridge (millivolts) |
| आउटपुट वोल्टेज रेंज | 0.3 V to 4.9 V | — |
| Supply Voltage Range | 4.85 V to 5.35 V | — |
| Sensitivity | 54 mV/kPa (typical) | — |
| Full-Scale Output (Nominal) | 4.9 V at 105 kPa | — |
| Accuracy | ±1.8% | — |
| सप्लाई करंट | [DATA_NEEDED: typical supply current in mA] | — |
| ऑपरेटिंग तापमान रेंज | -40C to +125C | -40C to +125C [DATA_NEEDED: confirm exact range from datasheet] |
| Port Type | Single axial port (no hose barb on basic element) | — |
| पैकेज / केस | 6-SIP Module (through-hole) | — |
| माउंटिंग प्रकार | Through Hole | Through-hole SIP module |
| Output Response Time | [DATA_NEEDED: response time in ms] | — |
| RoHS स्थिति | Compliant | Compliant [DATA_NEEDED: confirm from NXP product page] |
| Output Ratiometric to Vcc | Yes | — |
| Full-Scale Span (Typical) | — | 40 mV at 10 V excitation |
| Sensitivity (Nominal) | — | 0.4 mV/kPa |
| Supply Voltage (Recommended) | — | 10 V DC |
| Supply Voltage (Maximum) | — | 16 V DC |
| Pressure Port Configuration | — | Dual axial ports (differential) |
| पैकेज | — | 4-SIP Unibody (UNIBODY4F), 2.54 mm pitch |
| Package Body Dimensions | — | 15.56 mm x 15.56 mm x 5.33 mm |
| On-Chip Temperature Compensation | — | Yes (factory laser-trimmed) |
| Technology | — | Silicon piezoresistive MEMS strain-gauge bridge |
| Diaphragm Material | — | Silicon [DATA_NEEDED: confirm] |
| Linearity | — | 0.1% to 0.3% typical [DATA_NEEDED: confirm] |