OPA2107AP vs NE5532P तुलना
विस्तृत दोनों ओर की तुलना OPA2107AP द्वारा Texas Instruments और NE5532P द्वारा Texas Instruments. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
विशेषता तुलना
| पैरामीटर | OPA2107AP | NE5532P |
|---|---|---|
| ब्रांड | Texas Instruments | Texas Instruments |
| श्रेणी | Amplifier ICs | Amplifier ICs |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| Amplifier Type | Precision Dual Difet Operational Amplifier | — |
| Number of Channels | 2 | — |
| Gain Bandwidth Product | 4.5 MHz | — |
| Slew Rate | 18 V/us | 9 V/µs typical |
| Supply Voltage Range | +/-10 V to +/-18 V (20 V to 36 V total) | ±5 V to ±15 V |
| Input Offset Voltage | 1 mV max | 4000 µV maximum |
| Offset Voltage Drift | 10 uV/C max | — |
| Input Bias Current | 10 pA max | — |
| Input Voltage Noise | [DATA_NEEDED: input voltage noise density at 10 kHz] | — |
| Settling Time | Fast settling to 0.01% | — |
| Unity-Gain Stable | Yes | — |
| Output per Amplifier | Standard (General Purpose) | — |
| पैकेज | 8-PDIP (DIP-8) | 8-pin PDIP (P) |
| माउंटिंग प्रकार | Through Hole | Through hole |
| ऑपरेटिंग तापमान रेंज | [DATA_NEEDED: operating temperature range for AP grade] | — |
| RoHS स्थिति | [DATA_NEEDED: RoHS compliance status] | [DATA_NEEDED: RoHS status] |
| Amplifier Count | — | 2 amplifiers |
| Product Type | — | Dual low-noise operational amplifier |
| Maximum Supply Voltage | — | 30 V |
| Unity-Gain Bandwidth | — | 10 MHz typical |
| Equivalent Input Noise Voltage | — | 5 nV/√Hz typical at 1 kHz |
| Common-Mode Rejection Ratio | — | 100 dB typical |
| High DC Voltage Gain | — | 100 V/mV typical |
| Peak-to-Peak Output Voltage Swing | — | 32 V typical with VCC = ±18 V and RL = 600 ohm |
| Process Technology | — | Bipolar |
| ऑपरेटिंग तापमान | — | 0 °C to 70 °C |
| Primary Application | — | Audio |
| REACH Status | — | [DATA_NEEDED: REACH status] |