PN7160B1HN vs PN7160A1HN तुलना
विस्तृत दोनों ओर की तुलना PN7160B1HN द्वारा NXP Semiconductors और PN7160A1HN द्वारा NXP Semiconductors. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
विशेषता तुलना
| पैरामीटर | PN7160B1HN | PN7160A1HN |
|---|---|---|
| ब्रांड | NXP Semiconductors | NXP Semiconductors |
| श्रेणी | RF Transceivers | RF Modules |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| फ़ंक्शन | NFC Plug and Play Controller | — |
| इंटरफ़ेस | NCI over SPI | — |
| Operating Frequency | 13.56 MHz | 13.56 MHz |
| Supported Standards | FeliCa, ISO 14443, ISO 15693, MIFARE, NFC Forum | — |
| Host Interface Supply | 1.65 V to 1.95 V | — |
| RF/Analog Supply | 3 V to 3.6 V | — |
| ऑपरेटिंग तापमान | -40 C to +85 C | -30 C to +85 C |
| पैकेज | 40-VFQFN Exposed Pad | HVQFN-40 (6 x 6 x 0.85 mm) with Exposed Pad |
| माउंटिंग प्रकार | Surface Mount | Surface Mount |
| Integrated Firmware | Yes (NCI-compliant) | — |
| Reader/Writer Mode | Yes | — |
| Card Emulation Mode | Yes | — |
| Peer-to-Peer Mode | Yes | — |
| Host OS Support | Android, Linux, Windows | — |
| RoHS स्थिति | Compliant | Compliant |
| MSL स्तर | 1 | — |
| Product Type | — | NFC Plug and Play Controller |
| Supported Protocols | — | FeliCa, ISO 14443, ISO 15693, MIFARE, NFC |
| Host Interface | — | I2C (default, hardware) / SPI (EEPROM-configurable) |
| NCI Version | — | NCI 2.0 (pre-loaded firmware) |
| Digital Supply Voltage | — | 1.65 V to 1.95 V (VDD) |
| Analog/RF Supply Voltage | — | 3.0 V to 3.6 V (VBAT, VBAT_PA) |
| I/O Supply Voltage | — | 1.65 V to 1.95 V (VDDIO) |
| I2C Address | — | 0x28 (7-bit) |
| RF Output Power | — | [DATA_NEEDED: TX output power dBm] |
| Antenna Pins | — | TX1, TX2 (differential); RX1, RX2 |
| Integrated MCU Core | — | ARM Cortex-M0 (ROM-resident NCI firmware) |
| Operating Modes | — | Reader/Writer, Card Emulation (P2P), Tag Detection |
| Modes of Operation | — | Active, Standby, Hard Power Down, Low-Power Polling |
| Peak Reflow Temperature | — | 260 C (per JEDEC J-STD-020) |
| Moisture Sensitivity Level | — | MSL 3 |