PN7160B1HN vs PN7160A1HN مقایسه
مقایسه دقیق کنار به کنار PN7160B1HN توسط NXP Semiconductors و PN7160A1HN توسط NXP Semiconductors. مشخصات کلیدی، پارامترهای الکتریکی، بسته‌بندی، وضعیت چرخه عمر، قیمت‌گذاری و موجودی را مقایسه کنید تا بهترین قطعه را برای نیازهای طراحی خود تعیین کنید.
مقایسه مشخصات
| پارامتر | PN7160B1HN | PN7160A1HN |
|---|---|---|
| برند | NXP Semiconductors | NXP Semiconductors |
| دسته‌بندی | RF Transceivers | RF Modules |
| وضعیت چرخه عمر | فعال | فعال |
| عملکرد | NFC Plug and Play Controller | — |
| رابط | NCI over SPI | — |
| Operating Frequency | 13.56 MHz | 13.56 MHz |
| Supported Standards | FeliCa, ISO 14443, ISO 15693, MIFARE, NFC Forum | — |
| Host Interface Supply | 1.65 V to 1.95 V | — |
| RF/Analog Supply | 3 V to 3.6 V | — |
| دمای کاری | -40 C to +85 C | -30 C to +85 C |
| بسته‌بندی | 40-VFQFN Exposed Pad | HVQFN-40 (6 x 6 x 0.85 mm) with Exposed Pad |
| نوع نصب | Surface Mount | Surface Mount |
| Integrated Firmware | Yes (NCI-compliant) | — |
| Reader/Writer Mode | Yes | — |
| Card Emulation Mode | Yes | — |
| Peer-to-Peer Mode | Yes | — |
| Host OS Support | Android, Linux, Windows | — |
| وضعیت RoHS | Compliant | Compliant |
| سطح MSL | 1 | — |
| Product Type | — | NFC Plug and Play Controller |
| Supported Protocols | — | FeliCa, ISO 14443, ISO 15693, MIFARE, NFC |
| Host Interface | — | I2C (default, hardware) / SPI (EEPROM-configurable) |
| NCI Version | — | NCI 2.0 (pre-loaded firmware) |
| Digital Supply Voltage | — | 1.65 V to 1.95 V (VDD) |
| Analog/RF Supply Voltage | — | 3.0 V to 3.6 V (VBAT, VBAT_PA) |
| I/O Supply Voltage | — | 1.65 V to 1.95 V (VDDIO) |
| I2C Address | — | 0x28 (7-bit) |
| RF Output Power | — | [DATA_NEEDED: TX output power dBm] |
| Antenna Pins | — | TX1, TX2 (differential); RX1, RX2 |
| Integrated MCU Core | — | ARM Cortex-M0 (ROM-resident NCI firmware) |
| Operating Modes | — | Reader/Writer, Card Emulation (P2P), Tag Detection |
| Modes of Operation | — | Active, Standby, Hard Power Down, Low-Power Polling |
| Peak Reflow Temperature | — | 260 C (per JEDEC J-STD-020) |
| Moisture Sensitivity Level | — | MSL 3 |